Omron R7D-AP04L Servo AC 100VAC Supply 2.6A 100V Load 400 W SERVO DRIVE
Omron R7D-AP04L Servo AC 100VAC Supply 2.6A 100V Load 400 W SERVO DRIVE
Product information OMRON R7D-AP04L :
AC Servo Drive - OMRON (R7D) - Single phase input - Supply voltage 100Vac - (Continous output current) 1A - (Maximum motor capacity 50W) 0.050kW
• High-speed Response The G-series AC Servomotors and Servo Drives have achieved high-speed response capabilities, with a highresponse frequency of 1 kHz.
• Suppressing Vibration of Low-rigidity Mechanisms during Acceleration/Deceleration The damping control function suppresses vibration of low-rigidity mechanisms or devices whose ends tend to vibrate.
Two damping filters are provided to enable switching the vibration frequency automatically according to the direction of rotation and also via an external signal. In addition, the settings can be made easily merely by setting the vibration frequency and filter values, and you are assured of stable operation even if the settings are inappropriate.
• High-speed Positioning via Resonance Suppression Control The realtime autotuning function automatically estimates the load inertia of the machine in realtime and sets the optimal gain. The adaptive filter automatically suppresses vibration caused by resonance. Also, two independent notch filters make it possible to reduce vibration of a mechanism with multiple resonance frequencies.
- SERVO DRIVE
- SMARTSTEP SERIES
- 100-115 VAC INPUT
- 50/60 HZ
- SINGLE PHASE
- 11 AMP
- 0-240 VAC OUTPUT
- 2.6 AMP
Same series of R88 - :
R88D-GN04H-ML2 : G-Series servo drive, 1~ 200 VAC, MECHATROLINK II integrated, 400 W
R88M-G40030H-BS2 : G-Series/SmartStep 2 AC servo motor (cylinder type), 400 W, 200 VAC, 3000 rpm, 1.3 Nm, with brake
R88M-G40030H-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, incremental, Brake, with circular connector
R88M-G40030T-BS2: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake
R88M-G40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
R88M-GP40030T-BS2-D: AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, absolute, Brake, with circular connector
Details:
Similar Model Products:
| Specifications | Model | |
|---|---|---|
| Single-phase 100 VAC | 50 W | R7D-BPA5L |
| 100 W | R7D-BP01L | |
| 200 W | R7D-BP02L | |
| Single-phase/three-phase 200 VAC | 50 W | R7D-BP01H |
| 100 W | ||
| 400 W | R7D-BP04H | |
| Single-phase 200 VAC | 200 W | R7D-BP02HH |
| Three-phase 200 VAC | 200 W | R7D-BP02H |
| Item | Specifications | ||
|---|---|---|---|
| Ambient operating temperature Ambient operating humidity |
0 to 55 °C, 90% max. (with no condensation) | ||
| Ambient storage temperature Ambient storage humidity |
-20 to 65 °C, 90% max. (with no condensation) | ||
| Storage and operating atmosphere | No corrosive gasses, no dust, no iron dust, no exposure to moisture or cutting oil |
||
| Vibration resistance | 10 to 60 Hz; acceleration: 5.9 m/s2 (0.6 G) max. | ||
| Impact resistance | Acceleration of 19.6 m/s2 max. 3 times each in X, Y, and Z directions. | ||
| Insulation resistance | Between power supply/power line terminals and frame ground: 0.5 MΩ. min. (at 500 VDC) |
||
| Dielectric strength | Between power supply/power line terminals and frame ground: 1,500 VAC for 1 min at 50/60 Hz Between each control signal and frame ground: 500 VAC for 1 min |
||
| Altitude | 1,000 m above sea level max. (860 hp min.) | ||
| Degree of protection | Built into panel (IP10). | ||
| International standards |
EC Directives |
EMC Directive | EN 55011 class A group 1 EN 61000-6-2 |
| Low Voltage Directive |
EN 50178 | ||
| UL standards | UL 508C | ||
| cUL standards | cUL C22.2 No.14 | ||
| Korean Radio Regulations (KC) |
Certified | ||
| Specifications | Model | |
|---|---|---|
| Power Model Supply Voltage | Applicable Servomotor Capacity | |
| Single-phase 100 VAC |
50 W | R88D-KTA5L |
| 100 W | R88D-KT01L | |
| 200 W | R88D-KT02L | |
| 400 W | R88D-KT04L | |
| Single-phase/three-phase 200 VAC |
100 W | R88D-KT01H |
| 200 W | R88D-KT02H | |
| 400 W | R88D-KT04H | |
| 750 W | R88D-KT08H | |
| 1 kW | R88D-KT10H | |
| 1.5 kW | R88D-KT15H | |
| Three-phase 200 VAC |
2 kW | R88D-KT20H |
| 3 kW | R88D-KT30H | |
| 5 kW | R88D-KT50H | |
| 7.5 kW | R88D-KT75H | |
| 15 kW | R88D-KT150H | |
| Three-phase 400 VAC |
600 W | R88D-KT06F |
| 1 kW | R88D-KT10F | |
| 1.5 kW | R88D-KT15F | |
| 2 kW | R88D-KT20F | |
| 3 kW | R88D-KT30F | |
| 5 kW | R88D-KT50F | |
| 7.5 kW | R88D-KT75F | |
| 15 kW | R88D-KT150F | |
Note: 2. Always disconnect all connections to the Servo Drive before you perform insulation resistance tests on it. If you
perform an insulation resistance test while the Servo Drive is connected, the Servo Drive may be damaged.
Never perform dielectric strength tests on the Servo Drive. Failure to follow this precaution may result in
damaging internal elements.
Note: 3. Depending on the operating conditions, some Servo Drive parts will require maintenance.
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.