MDDLN55SE Industrial Servo Drives Panasonic 3-Phase 200 V A6SE Series

Price Negotiable

Price: Negotiated

MOQ: 1

Delivery Time: 5-8days

Brand: Panasonic

Product Description

MDDLN55SE Panasonic 3-phase 200 V A6SE series Industrial Servo Drives

Spec Detail

Item	Specifications
Part Number	MDDLN55SE
Details	A6SE series Position control type (Incremental system only, Pulse train only) without the safety function
Family Name	MINAS A6
Series	A6SE series
Type	Position control type
Frame	D-Frame
Frequency response	3.2 kHz
Control method	Position control
About control method	A6SE series driver (Position control only) does not correspond to the absolute system of using the serial communication with the host device. It supports incremental system only.
Safety Function	without the safety function
Supply voltage	Single/3-phase 200 V
I/F Classification of type	Pulse train only
Dimensions (W) (Unit: mm)	85
Dimensions (H) (Unit: mm)	150
Dimensions (D) (Unit: mm)	170
Mass (kg)	2.1
Environment	For more details, please refer to the instruction manual.

Specifications

Input power: Main circuit Single/3-phase 200 to 240V +10% -15% 50/60 Hz
Input power: Control circuit Single phase 200 to 240V +10% -15% 50/60 Hz
Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
About Encoder feedback * Since it can be used only as an incremental system, do not connect the battery for absolute encoder. Parameter Pr. 0.15 must be set to "1" (factory settings).
Parallel I/O connector:
Control signal Input General purpose 10 inputs
The function of general-purpose input is selected by parameters.
Parallel I/O connector:
Control signal Output General purpose 6 output
The function of general-purpose output is selected by parameters.
Parallel I/O connector:
Analog signal Output 2 outputs (Analog monitor: 2 output)
Parallel I/O connector:
Pulse signal Input 2 inputs (Photo-coupler input, Line receiver input)
Parallel I/O connector:
Pulse signal Output 4 outputs (Line driver: 3 output, open collector: 1 output)
Communication function USB
Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
Regeneration Built-in regenerative resistor (external resistor is also enabled.)
Control mode Switching among the following 3 mode is enabled,
(1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command

The following are some of the drive models, both new and used are stocked: