XSG Series High Efficiency Rotary Flash Evaporation Drier spin flash dryer

Features

1. The productivity of the machine is high as the materials inside are micronized by centrifugation, cutting, collision and friction. The thermal transmission in the machine is enhanced for particles are highly dispersed, and the relative speed between solid and gas phases is comparatively high.

2. The dry air enters the bottom of the drier and will generate strong rotary current, which will brush and carry out the materials stuck on the walls.

3. The thermo sensitive materials in the high temperature area at the bottom of the drier have no direct contact with the thermal surface. Special equipment is added to prevent the burning and color change of thermo sensitive materials.

4. The machine features high efficiency, high speed, small size and mass production as the wind speed is high and the staying time of materials is short in the drying chamber.

5. Ceramic rings and whirl plate are installed in the upper part of the drying chamber to control the granularity and humidity to meet the requirements on discharged materials.

1. Several feeding device can be chose, feeding is continuous andstable, no phenomenon of bridging.

2. There is special cooling device at the bottom of dryer, it canavoid the material that in the bottom high temperature area be bad.

3. There is special air sealing device and cooling device for bearing,it can make the life of transmission part longer effectively.

4. There is special air distributing device, it can reduce theresistance of equipment, and make the air speed in drying towerbecome balance.
5. There is classify ring and turbojet plate, the fineness and finalmoisture of product can be adjusted and controlled.6.Circumference air speed in the drying tower is high, theresidence time of material is short, it can avoid the material stick onthe wall and thermal sensitive materials go bad.