Fanuc M-410iC/500 Payload 500kg 4 Controlled Axes Palletizing Robot Packaging Automation Robot Industrial Gripper OEM

When the load is a full pallet of 50 kg bags (1200–1500 kg with pallet and slip sheet), nothing else touches the M-410iC/500. It grabs the whole pallet with a big fork tool or vacuum frame, swings it around at 700+ cycles per hour, and stacks 2.6 m high without slowing down. One robot replaces a whole forklift shift and never gets tired. Plants in the Middle East and Asia run two or three of them non-stop on cement bag lines.

• 500 kg real payload – not marketing numbers
• 3233 mm reach – covers four pallets easy
• Still does 700–800 cycles/h with 400 kg load
• Super stiff wrist – no shaking with offset loads
• IP67 arm – cement dust and wash-down no problem
• R-30iB Plus controller – same as the small ones

• 50 kg cement bag palletizing
• Big bag (500–1000 kg) handling
• Full pallet transfer lines
• Heavy drum and IBC palletizing

Q: Is 500 kg real?
A: Yes – customers run 450–480 kg tools all day.

Q: How many bags per hour?
A: 1200–1400 bags/h with 50 kg bags is normal.

Fanuc Robotics
Phone: +8615000725058
Email: edwardzhao@gbsxj.com

• M-410iC/315 – 315 kg version
• M-410iC/185 – lighter brother
• M-2000iA/1200 – even bigger