Traffic Road Marking Machine With Quick Drying Coating Acrylic Marking Paint

Key points of construction: 1. The sand, cement slurry, oil stains, and loose debris on the surface of the concrete base should be removed, and holes and defects should be repaired and embedded in batches. The rust on the metal surface should be removed and wiped with solvent. Within 24 hours, the primer should be applied first (usually the primer used in conjunction with the navigation mark paint), and then the navigation mark topcoat should be applied. 2. The surface moisture content of the base layer of the coated object is 8%. Construction should not be carried out on rainy, foggy, or windy days with condensation. 3. This coating can be applied by brush, roller, or spray methods. 4. The product should be stored in a cool and ventilated place, protected from rainforest and direct sunlight, kept away from flames and heat sources, and transported in accordance with the regulations for flammable materials. 5. Reference for paint consumption: concrete 220-250/㎡ (one coat), steel 200-220/㎡ (one coat). Paint mixing Acrylic polyurethane topcoat and curing agent are strictly mixed in a 5:1 ratio, with the addition of a special diluent. They are thoroughly stirred with a power mixer and matured for about 20 minutes. The amount of curing agent added shall be strictly operated according to the ratio, and it is not allowed to add more or less.