Practical Gray Reusable Pulse Oximeter Sensor , Reusable infant silicone soft tip SpO2 Sensor for DRE patient monitors
Reusable Adult Spo2 Sensor Covidien > Nellcor Compatible Short SpO2 Sensor 6pin
OEM Part Number Cross References:
| Manufacturer | OEM Part # |
|---|---|
| Criticare | 934-10DN, CAT934-10DN |
Compatibility:
| Manufacturer | Model |
|---|---|
| CareFusion > Alaris |
4415, VitalCheck 4400, VitalCheck 4410
|
| Criticare |
503 Spot, 503DX, 503DX-W, 503S, 504DX, 504DX/P, 504DXN, 506DN, 506DN3, 506DNP3, 506DNT3, 506DNTP3, 506DNV3, 506DNVP3, 506DXN, 506LNP3, 506LNT3, 506LNTP3, 506LNV3, 506LNVP3, 506N3, 506NP3, 506NT3, 506NTP3, 506NV3, 506NVP3, 507ELC2, 8000 series, 8100 series, 8100E, 8100EP, Poet (602-3A), Poet Plus, Poet R Plus, Scholar, Scholar III, nCompas
|
| Ivac |
VitalCheck 4400, VitalCheck 4410, VitalCheck 4415
|
Identification/Area of Application
- Pulse rate declared accuracy range: 30~245bpm, ±2bpm
Usage Specifications:
- Operating temperature: 0~40℃
- Operating humidity: 15~85%RH
- Operating hyperbaric pressure: 86~106kPa
- Storage and transportation temperature: -20~+55℃
- Storage and transportation humidity: 10~85%RH
- Storage and transportation hyperbaric pressure: 86~106kPa
Remind:
When you choose a Spo2 sensor, please carefully check the following points:
1) Is the Spo2 sensor connector actually compatible with your patient monitor socket? 5 or 6 pins.
2) Is the patient terminal the type you want? Snapshot or clip?
Are the sensors used for the right people? Such as adults or newborns.
Application:
*The sensor and its cable must be cleaned before each patient
*Place the sensor on the index finger ensuring the finger is fully inserted and the tip of the finger rests against the finger stop inside the sensor
*Possible alternate sites are small-sized thumb, middle and ring fingers as well as the little finger or the big toe
*Ensure the fingernail is located under the finger stop on the SpO2 sensor clamp.
*The sensor must not be located on the same arm as the blood pressure cuff, arterial catheter or intravascular line.
*Remove all nail polish as this can effect accuracy
*Do not use the sensor inside or near an MRI.
*Avoid having intense light sources near the sensor
*For long-term use, the measurement site must be changed every 4 hours in order to guarantee the integrity of the patients skin
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.