Transformer Oil Or Dry Type Use Of 1 Ton And 2 Ton Winding Machines
GDY-1T GDY-2T WINDING MACHINE
- General Provisions
1.1 The scope of use of this technical specification applies to the requirements for the use of 1 ton and 2 ton winding machines
2 Standards and specifications
2.1 Reference standards
According to relevant national and industry standards, advanced technology at the current stage is adopted to ensure equipment functionality
We design and manufacture with the goal of being advanced, easy to operate, stable in performance, and long-lasting in service life.
2Conditions of Use
| NO | Description | Unit | Standard value | |
| 1 | ambient air temperature | maximum temperature | ℃ | ＋40 |
| minimum temperature | -10 | |||
| 2 | altitude | m | 1000 | |
| 3 | humidity | % | ≤95 | |
| 4 | voltage | V | AC3×380V+10% | |
| 5 | frequency | Hz | 50Hz+2% | |
| 6 | Installation location | Indoor | ||
3 2 tons of main key technical parameters
| NO. | Type | Parameter project | Specification parameters | Remark |
| 1 | General parameters | maximum payload(Kg) | 2000 | |
| 2 | Working torque | 大于2000N/M | ||
| 3 | Spindle speed(r/min) | 0-200r | ||
| 4 | Spindle center height(mm) | 900 | ||
| 5 | Maximum shaft length(mm) | 1500mm | ||
| 6 | Axis size | 40 40 | ||
| 7 | Expansion length of tailstock telescopic shaft(mm) | 0-150 | ||
| 9 | working voltage(V)380±10 ﹪ | 380±10 ﹪ | ||
| 10 | Main motor power(kW) | 7.5 | ||
| 11 | Speed Control | Frequency Control | ||
| 12 | Counting method | counter | ||
| Stop using status without pressing enter | ||||
1 ton main key technical parameters
| NO. | Type | Parameter project | Specification parameters | Remark |
| 1 | General parameters | maximum payload(Kg) | 2000 | |
| 2 | Working torque | 大于2000N/M | ||
| 3 | Spindle speed(r/min) | 0-300r | ||
| 4 | Spindle center height(mm) | 900 | ||
| 5 | Maximum shaft length(mm) | 1200mm | ||
| 6 | Axis size | 40 40 | ||
| 7 | Expansion length of tailstock telescopic shaft(mm) | 0-150 | ||
| 9 | working voltage(V)380±10 ﹪ | 380±10 ﹪ | ||
| 10 | Main motor power(kW) | 5.5 | ||
| 11 | Speed Control | Frequency Control | ||
| 12 | Counting method | counter | ||
| Stop using status without pressing enter | ||||
4,Instructions
- Flower plate
The flower plate is made of A3 steel and has strong rigidity.
- Main shaft gearbox
The main shaft variable speed is composed of pulleys, variable speed transmission system, motor, etc. The spindle box variable frequency stepless speed regulation ensures a smooth start-up process and accurate and reliable braking of the entire equipment. The motor torque is reduced and amplified by the main axle box, providing winding torque.
3. Tailstock
The tailstock is equipped with a forward and backward moving mechanism that can slide forward and backward on the base to adjust the distance
4 .Electric control system
operator can use a foot switch to operate the entire winding process. The counter can count forward and backward, and has power-off memory and automatic parking function.
The main spindle box, tail box, and base are all made of high-quality steel and welded using CO2 gas shielded welding. After welding, they undergo aging treatment and then precision machining; Good welding quality and high machining accuracy ensure stable and reliable overall performance after assembly
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.