Stainless steel plate is a kind of hollow section with no seams around.The thicker the thickness of the product, stainless steel plate is more economical and practical, the thinner the wall thickness, stainless steel plate's processing costs will rise significantly. Stainless steel plate of its limited performance of the decision, the general low precision seamless steel pipe : Wall thickness is not uniform, stainless steel plate's surface brightness is low, stainless steel plate's cost of high-length, and the appearance of pitting, black spots are not easy to remove.Stainless steel plate is detection and shaping must be off-line processing. So stainless steel plate in the high-pressure, high strength, mechanical structure of timber reflects stainless steel plate's superiority.
| Product Name |
stainless steel sheet |
| Thickness |
0.3-100mm |
| Width |
600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
| Length |
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
| Surface |
BA/2B/NO.4/8K/HL |
| Payment terms |
L/C T/T (30%DEPOSIT) |
| Stock or not |
enough stock |
| Sample |
Provided Freely |
| MTC |
Mill Test Certificate is supplied with shipment, Third Part Inspection is acceptable |
| Container Size |
20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) |
| 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) |
| 40ft HC: 12032mm(Lengh)x2352mm(Width)x2698mm(High) |
| Delivery time |
Within 7-10 Working Days |
| 2B |
After cold rolled, the products are treated by heat treatment, pickling or similiar methods, skin passing to obtain proper surface brightness. |
| 2D |
After cold rolled, the products are treated by heat treatment, pickling or similiar methods, skin passing with rough roll to obtain surface with certain roughness. |
| HL |
Products are treated by polishing with proper abrasive substance to obtain continuous lines. |
| No.4 |
Products are treated by polishing with proper abrasive substance(grain size 150-320) according to GB2477. |
| BA |
After cold rolled, the products are treated by bright annealing method to obtain surface brightness. |
| No.8 |
Products are treated by polishing with proper abrasive substance. The product have excellent brightness and prefer reflexivity can to be the mirror. |
| No.1 |
After hot rolled, the products are treated by heat treatment, pickling or similiar methods, skin passing to obtain proper surface brightness. |
