TS5N412DBQR 4 Circuit IC Switch 2:1 12.5Ohm 16-SSOP IC SWITCH 6SSOP Integrated Circuits
Price:
Email us for details
MOQ:
1pcs
Delivery Time:
1day
Brand:
Texas Instruments
Product Description
TS5N412DBQR 4 Circuit IC Switch 2:1 12.5Ohm 16-SSOP IC SWITCH 6SSOP
Encoders, Decoders, Multiplexers & Demultiplexers 4-Bit 1-of-2 Fet Mltplxr/Demltplxr
| Texas Instruments | |
| Product Category: | Encoders, Decoders, Multiplexers & Demultiplexers |
| RoHS: | Details |
| Multiplexers / Demultiplexers | |
| 8 Input | |
| 2 Output | |
| 3 ns | |
| 4.75 V | |
| 5.25 V | |
| - 40 C | |
| + 85 C | |
| SMD/SMT | |
| SSOP-16 | |
| Reel | |
| Brand: | Texas Instruments |
| Features: | Powered off protection |
| Function: | Multiplexer/Demultiplexer Bus Switch |
| Height: | 1.5 mm |
| High Level Output Current: | - 100 mA |
| Length: | 5 mm |
| Low Level Output Current: | 100 mA |
| Moisture Sensitive: | Yes |
| Number of Circuits: | Single |
| Operating Supply Voltage: | 4.75 V to 5.25 V |
| Operating Temperature Range: | - 40 C to + 85 C |
| Product Type: | Encoders, Decoders, Multiplexers & Demultiplexers |
| Series: | TS5N412 |
| Subcategory: | Logic ICs |
| Width: | 4 mm |
| Unit Weight: | 0.002628 oz |
Description
The TS5N412 is a high-bandwidth FET bus switch utilizing a charge pump to elevate the gate voltage of the pass
transistor, providing a low and flat ON-state resistance (ron). The low and flat ON-state resistance allows for
minimal propagation delay and supports rail-to-rail switching on the data input/output (/O) ports. The device also
features low data I/O capacitance to minimize capacitive loading and signal distortion on the data bus.
Specifially designed to support high-bandwidth applications, the TS5N412 provides an optimized interface
solution ideally suited for broadband communications, networking, and data-intensive computing systems.
The TS5N412 is a 4-bit 1-of-2 multiplexer/demultiplexer with a single output-enable (OE) input. The select (S)
inputs control the data path of the multiplexerl/demultiplexer. When OE is low, the multiplexer/demultiplexer is
enabled and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE is
high, the multiplexer/demultiplexer is disabled and a high-impedance state exists between the A and B ports.
This device is fully specified for partial-powerdown aplications using lof The loff circuitry prevents damaging
current backflow through the device when it is powered down. The device has isolation during power off.
To ensure the high-impedance state during power up or power down, OE should be tied to Vcc through a pullup
resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
FEATURES
●Low and Flat ON-State Resistance (ron) Characteristics Over Operating Range(ron=3 2 Typ)
●0- to 10-V Switching on Data /0 Ports
●Bidirectional Data Flow With Near-Zero Propagation Delay
●Low Input/Output Capacitance Minimizes Loading and Signal Distortion (Cio(0FF)= 20 pF Max, B Port)
●Vcc Operating Range From 4.75 V to 5.25 V
●Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
●ESD Performance Tested Per JESD 22
- 2000-V Human-Body Model(A114-B, Class I)
- 1 000-V Charged-Device Model (C101)
●Supports Both Digital and Analog Applications
APPLICATIONS
●PCI Interface
●Differential Signal Interface
●Memory Interleaving
●Bus Isolation
●Low-Distortion Signal Gating
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Wisdtech Technology Co.,Limited
Location
Room 1205-1207, Nanguang building, Huafu Road, Futian District, Shenzhen, Guangdong, China
Contact Person
Tao