AFP Galvalume Steel Coil AS 1397 G550 Aluzinc Steel Coil 0.95*168mm
Price:
750USD/MT
MOQ:
25 MT
Delivery Time:
30-40 DAYS
Product Description
AS1397 G550 Alu zinc steel structural steel AFP Galvalume Steel Coil 55% AL-ZN Regular Spangle 0.95*168mm
Hot-dip aluminium-zinc coated steel plate is a pre-coated steel plate obtained by hot-dip plating a layer of Al-Zn coating on both sides of a cold rolled steel plate of various strengths and thicknesses as a substrate, with a mass percentage of 55% Al (aluminium), 43.5% Zn (zinc) and 1.5% Si (silicon) in the composition of the plated layer, which combines the physical protection of Al and high durability as well as the electrochemical protection of Zn, and has the strength and plasticity of the base steel, and the corrosion resistance of the coating. The material has the strength and plasticity of substrate steel and the corrosion resistance of plating, which protects the metal substrate from internal corrosion. In addition, the surface has a highly decorative bright silver grey colour and regular patterns with a sense of embossment.
The corrosion resistance of "Aluminium-zinc plated steel coil" comes from the barrier layer protection function of aluminium and the sacrificial protection function of zinc. When zinc is sacrificed on cut edges, scratches and abrasions of the plating, aluminium forms an insoluble oxide layer which acts as a barrier. Aluminium-zinc-plated alloy steel coil has been in a variety of different atmospheric environments, outdoor exposure tests for more than 20 years, confirmed that aluminium-zinc-plated steel cutting edge protection, than galvanised steel is much better.
Aluminium-zinc-steel plated light steel has quite a few excellent characteristics: Strong corrosion resistance, 3 times that of pure galvanising; beautiful zinc flowers on the surface, can be used as building roof exterior panels. Abbreviation AZ150, aluminium-zinc-steel plates keel for a long time without colour change on the bare surface, such as chemical corrosion, the surface of the physical reaction occurs, the formation of aluminium protective film on the surface of the keel, so that the outside world of chemical substances and the keel separated from the separation of the keel, to protect the keel of the main body of the material, to prevent rusting.
Corrosion resistance is mainly because of aluminium, the protective function of aluminium. When the zinc is abraded, aluminium forms a dense layer of aluminium oxide, preventing the corrosion-resistant substances from further corroding the interior.
Aluminium-zinc-steel-plated alloy steel coils have been subjected to more than 20 years of outdoor exposure tests in a variety of atmospheric environments, confirming that aluminium-zinc-plated steel sheets provide much better protection for cut edges than galvanised steel sheets.
Aluminium zinc steel plating: AZ150 for short, aluminium zinc plating is galvanized corrosion 2-6 times, aluminium zinc plating keel long-term naked surface has no colour change, such as in the case of chemical corrosion, the surface of the physical reaction occurs on the surface of the keel to form a protective film of aluminium, so that the outside world of the chemical substances and the keel separated from the separation of the keel to protect the keel of the main body of the material, to prevent rusting.
G550 550Mpa 2.06X105 N/mm 2 7.85g/cm 3 1.2×10-5℃
The commonly used mechanical properties and physical parameters of G550 aluminium zinc plating are as follows:
Name Yield strength Modulus of elasticity Volume weight Coefficient of thermal expansion
G550 550Mpa 2.06X105 N/mm 2 7.85g/cm 3 1.2×10-5°C
Application:
Buildings: roofs, walls, garages, soundproof walls, pipes, and modular houses, etc
Automobile: muffler, exhaust pipe, wiper accessories, fuel tank, truck box, etc
Home appliances: refrigerator backplate, gas stove, air conditioner, electronic microwave oven, LCD frame, CRT explosion-proof strip, LED backlight, electrical cabinet, etc
Agriculture: pig houses, chicken houses, granaries, greenhouse pipes, etc
Others: heat insulation cover, heat exchanger, dryer, water heater, etc.
Index |
Regular spangle / Minimum SpangleGalvalume/ 55% Aluzinc Steel Coil/Sheets |
Thickness |
0.13-2.0mm |
Width |
600~1500mm |
Zinc Coating |
AZ30~AZ200 g/㎡ |
Surface Treatment |
AFP (anti-finger print)Passivated / Chromated 6+,3+, Free; Oiled; Skin-passed |
Steel Grade |
DX51D/52D/53D/S250GD/280GD/350GD/550GDASTM A792M, CS-B, SS255-SS550JIS G3302-SGCC, SGCH (Full hard-G550) |
Coil I.D. |
508 / 610 mm |
Coil weight |
2 ~ 20 tons |
Packaging |
Standard export packing ( Eye to Side)Vertical Packing ( Eye to Sky) with wooden palletHorizontal Packing ( Eye to Side) with wooden pallet |
MOQ. |
16 tons |
Loading port |
Tianjin / Qingdao / Rizhao port |
Related Videos
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shandong Decho Building Materials Technology Co., Ltd
Location
RM302, BLDG3, Zhongde Science Park,Jimo 266200,Shandong



