Silent Enclosed Diesel Generator 55kw Prime For Uninterruptible Power Supply
Silent Enclosed Diesel Generator 55kW Prime for Uninterruptible Power Supply
Prime 55kW diesel generator typically refers to a generator with a power output of 55 kilowatts (55,000 watts). These generators are designed to provide backup power during power outages or as a secondary power source in situations where a reliable power supply is essential.
Key Futures for a prime 55kW diesel generator:
- Power Output: The generator is rated at 5kW, meaning it is capable of delivering a continuous power output of 55,000 watts. This power rating indicates the generator's capacity to handle a specific load, which should be assessed based on the electrical requirements of the intended application.
- Standby Operation: Standby generators are typically designed for intermittent or backup use. They are meant to provide power during utility outages or when the primary power source is unavailable. Standby generators are not intended for continuous or prime power applications.
- Diesel Engine: The generator is equipped with a diesel engine manufactured by FAWDE or another brand. Diesel engines are known for their durability, fuel efficiency, and long service life. They are commonly used in standby generators due to their ability to provide reliable power for extended durations.
- Automatic Transfer Switch (ATS): Standby generators are often paired with an automatic transfer switch (ATS), which monitors the utility power supply. When a power outage occurs, the ATS automatically senses the loss of utility power and switches the generator on, allowing it to supply electricity to the connected loads. Once utility power is restored, the ATS transfers the load back to the main power source and shuts down the generator.
- Installation and Maintenance: Proper installation and regular maintenance are crucial for the reliable operation of the standby generator. It is important to follow the manufacturer's guidelines for installation, including electrical connections, fuel supply, and exhaust systems. Routine maintenance, such as oil and filter changes, should be performed as recommended by the manufacturer.
- Safety and Compliance: Standby generators should comply with relevant safety standards and regulations. This includes considerations such as exhaust emissions, noise levels, and electrical safety. Ensuring compliance with local codes and regulations is important for the safe and legal operation of the generator.
55kW DIESEL GENERATOR TECHNICAL DATA:
| Technical Specification: | ||
| Generator Set Specification | ||
| Genset Model | TG76FW | TG76FWS |
| Open | Silent | |
| Frequency | 50Hz | |
| Voltage | 380/220V | |
| Phase | 3 Phase, 4 Wires | |
| Rate Current | 104A | |
| Prime Power | 55W / 69kVA | |
| Standby Power | 61kW / 76kVA | |
| Engine Model | FAWDE 4110/125Z-09D-YFD10W | |
| Alternator Model | TGI224S55 | |
| ATS | 160A Auto Transfer Switch Built-in | |
| Controller | TG6120 | |
| Weight & Dimensions | ||
| Length (mm) | 2060 | 2690 |
| width (mm) | 800 | 1050 |
| Height (mm) | 1200 | 1300 |
| Weight (kgs) | 1000 | 1400 |
| Engine Specification | ||
| Brand | FAWDE | |
| Engine Model | 4110/125Z-09D-YFD10W | |
| Prime power | 65kW | |
| Injection | Indirect | |
| Aspiration | Turbocharged | |
| No. of cylinders | 6 | |
| Bore of Stroke (mm) | 110 x 125 | |
| Displacement (L) | 4.75 | |
| Cooling | water | |
| Compression Ratio | 17.25:1 | |
| Engine Oil capacity (L) | N.A | |
| Coolant Capacity ( In radiator) | N.A | |
| Governor | Electric | |
| Air Filter | Dry Element | |
| Fuel consumption | @ 50Hz | |
| 100% Load (L/h) | 15.06 | |
| 75% Load (L/h) | 11.3 | |
| 50% Load (L/h) | 7.5 | |
| 25% Load (L/h) | 3.8 | |
| Alternator Specification | ||
| Brand | Copy Stamford | |
| Model | TGI224S55 | |
| Rate Output | 55kW | |
| Pole | 4 | |
| Winding Connections | Star | |
| Insulation Class | H | |
| Enclosure | IP23 | |
| Altitude (m) | ≤1000 | |
| Voltage Regulator | AVR | |
| Steady State Voltage Regulator | 1% | |
| Bearing | Single | |
| Controller System | ||
| Brand | Tecgen | |
| Model | TG6120 | |
| Functions | Control with AMF module | |
| Static with auto. battery charger | ||
| Emergency stop push button | ||
| ATS Connection | ||
| OPTIONAL EQUIPMENTS | ||
| ATS Box, Switch Box, ABB Breaker, Remote Control, Daily Fuel Tank, Engine Heater, Water Heater, PMG Generator, Generator Heater, Parallel Panel, Fuel-water separator, Super Silent type, Trailer Type, 3000Hours Spare Parts | ||
55kW Diesel Generator Set Powered by FAWDE Diesel Engine
FAWDE 55kW diesel generator powered by a FAWDE diesel engine, coupled with a Copy Stamford alternator and a TG6120 Controller, would comprise a generator set with specific components.
- FAWDE Diesel Engine: FAWDE is a Chinese manufacturer known for producing diesel engines. The FAWDE diesel engine in this generator set would serve as the primary power source. FAWDE engines are known for their durability and fuel efficiency.
- Copy Stamford Alternator: The generator set would feature a Copy Stamford alternator. Stamford is a renowned brand in the generator industry, known for producing high-quality alternators. The Copy Stamford alternator is designed to work in a similar manner to the original Stamford alternators, providing reliable electrical power generation.
- Tecgen TG6120 Controller: The TG6120 Controller is an advanced control system specifically designed for generator sets. It offers comprehensive monitoring and control capabilities. The TG6120 Controller allows for monitoring of various parameters such as voltage, frequency, engine parameters, and alarms. It also provides control functions, including automatic start/stop and protection features.
When combined, these components form a 55kW diesel generator set that can be used for various applications, such as backup power in residential or small commercial settings, remote sites, or construction projects. The FAWDE diesel engine provides the mechanical power, which is converted into electrical power by the Copy Stamford alternator. The TG6120 Controller ensures proper control, monitoring, and protection of the generator set.
FAQ?
Q: Do you offer OEM service?
A: Yes, we can design genset with your brand or your other requirements.
Q: What is your payment term?
A: 20% T/T in advance, the rest payment before shipment. Or irrevocable L/C.
Q: What is your lead time?
A: About 15 days after receiving deposit or original L/C. But if your order with some special design, then the delivery time is longer.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, CIQ for Egypt, SASO for Saudi Arabia, etc.
Q:What is your MOQ?
A: Above 1pcs
Q: What is your warranty?
A: We provide 18 months or 1500 running hours for our generator set.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.

