Reverse

Stand-Off

Voltage V_RWM (V)

Breakdown

Voltage V_BR (V) @I_T

Test

Current

I_T

(mA)

Maximum

Clamping

Voltage V_C (V) @I_PP

Maximum

Peak Pulse

Current

I_PP (A)

Maximum

Reverse

Leakage I_R (μA) @V_RWM

5

u Glass passivated chip junction in P600 Package

u Low leakage

u Uni-directional and Bi-directional

u Excellent clamping ability

u Fast to respond and respond

u RoHS compliant and Halogen free

u Typical IR less than 5μA above 12V.

u Matt Tin Lead Free

u 5000W Peak power with 10 × 1000µs waveform Duty cycle: 0.01%

u Fast response time: Typically less than 1.0 ps from 0 volts to VBR min.
u High Temperature soldering: 260°C/40 seconds at terminals
u Typical maximum temperature coefficient ΔVBR = 0.1% ×VBR@25°C× ΔT
u Plastic package has Underwriters Laboratory Flammability 94V-0
u Typical failure mode is short due to over voltage or over current.
u Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
u IEC-61000-4-2 ESD 15kV(Air), 8kV (Contact)
uESD protection of data lines according to IEC 61000-4-2
(IEC801-2)
u EFT protection of data lines according to IEC 61000-4-4
(IEC801-4)

• SOCAY owns copyrights, trademarks, several patents, trade secrets and other intellectual property rights.
• SOCAY reserves the right to make changes to the products described herein without notice.
• SOCAY makes no warranties, representations or guarantees as to the suitability of its products for any particular purpose and disclaims all liability.
• The parameters specified in the SOCAY data sheet may vary from application to application and actual performance may vary over time. All operating parameters must be verified by the customer's technical expert before use.
• All responsibility and liability is disclaimed for failure to comply with any of the provisions of this warning.