T9400-15G/18.5P Variable Frequency Drive Inverter 18.5kw 380v
T9400-15G/18.5P Low Frequency Inverter 18.5kw 380v volage Ac Variador De Frecuencia
ZONCN 15kw 400v High Performance AC Drives Vfd
Basic product introduction:
1: Vector control for synchronous and asynchronous motors with open-loop/closed-loop capability, V/F control (equipped with integrated PID)
2: High torque output to ensure smooth motor start-up even under heavy load conditions
3: Versatile functionality, exceptional performance, suitable for a wide range of applications
4: Compatible with various types of position feedback (PG) cards
5: Supports instantaneous stop and start operations
6: Compact design for easy customer installation
7: Available voltage options include 220v, 380v, 415v, 440v, and 460v, with a maximum power rating of 450kw.
Technical Specification:
| Item | T9000 series inverter |
| Control mode | V/F control；Open loop vector control (without PG); Closed loop vector control (with PG) |
| Maximum frequency | 0~600Hz |
| Carrier frequency | 0.5kHz~16kHz The carrier frequency is automatically adjusted based on the load features. |
| Input frequency resolution | Digital setting:0.01Hz Analog setting: Maximum frequency 0.025% |
| Startup torque | G type: 0.5Hz/150%(SFVC) ； P type: 0.5Hz/100% |
| Speed range | 1:100(SVC) |
| Speed stability accuracy | ±0.5%(SVC) |
| Overload capacity | G Type:60s for 150% of the rated current, 3s for 180% of the rated current. P Type:60s for 120% of the rated current, 3s for 150% of the rated current. |
| Torque boost | Auto boost or Customized boost 0.1%-30.0% |
| V/F cure | Straight-line VF curve; Multi-point VF curve; N-power VF curve(1.2-power,1.4-power,1.6-power,1.8-power,square) |
| V/F separation | 2 types: complete separation；half separation |
| Ramp mode | Straight-line ramp ; Four groups of acceleration/deceleration time with the range of 0.00'6500.0s |
| Simple PLC, Multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of terminal states |
| Auto voltage regulation | It can keep constant output voltage automatically when the mains voltage changes |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the FVC mode. |
| Support for multiple PG card | Support for differential input PG card, resolver PG card ,rotating transformer PG card |
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. |
| Timing control | Timing range:0.0Min~6500.0Min |
Product configuration T9000:
· Vector/VF control:Yes
· Closed loop vector control:Yes
· Built-in brake unit:Support below 37kw,above 45kw optional
· 0.1s acceleration and deceleration:Yes
· Removable panel:Yes
· High speed pulse output:Yes
· 24v power supply:Yes
· DC braking:Yes
· STO function:Yes
· Profinet / RS485:Yes
· I/O extension:Yes
· External set filter:Yes
· External brake resistor:Yes
· Simple PLC function:Yes
· Electric reactor:Optional
· PID:Yes
· Level of protection:IP20
Product application:
T9000 series inverter is an advanced equipment widely used in the field of industrial control. It is widely used in compressors, pumps, fans, lathes and other small and medium-sized equipment. The T9000 series inverter has the characteristics of long service life and low failure rate, so it is loved by consumers. Its stability and reliability make it the preferred device in the field of industrial control. Not only that, the T9000 series inverter also has the characteristics of high efficiency and energy saving, which can effectively improve the operating efficiency of the equipment and reduce energy consumption. In short, the wide application of T9000 series inverter in the field of industrial control provides reliable support for the operation of various small and medium-sized equipment.
T9000 configuration table:
FAQ:
Q1:What is your MOQ?
A: 1 pc
Q2:What's your terms of payment?
A:T/T 100% before delivery.
Q3:What's your delivery time?
A:Generally within 15 days after receiving full payment.
Q4:How can l get OEM/ODM order?
A:If your order quantity meets certain requirements, we are happy to customize it for you. We have cooperation with more than forty manufacturers.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.