China Eltek Rectiverter 230V1500VA 220V1200W 241123.140 for sale

Eltek Rectiverter 230V1500VA 220V1200W 241123.140

Price Negotiable

Price: 350USD

MOQ: 1

Delivery Time: 1 week

Brand: Eltek

Product Description

Eltek Rectiverter 230V1500VA 220V1200W 241123.140

Rectifier & Inverter in one box

Introduction

Built on HE technology from the Flatpack2 HE rectifier family the Rectiverter 230/1500 220/1200 provides backed up power for 230 VAC loads with minimum losses and footprint
It is a 3 port device capable of charging the 220V battery and simultaneously provides power for the AC and DC loads. During mains outage the Rectiverter feeds AC loads using energy stored in the battery.

Rectiverter 230V1500VA 220V1200W 241123.140
Models / ordering information	230/1500 110/1200	230/1500 110/1200	230/1500 110/0	115/750 110/600	115/750 110/0	115/750 110/0
Part number	241123.130	241123.131	241123.132	241123.130L	241123.131L	241123.132L
AC OUTPUT DATA
Voltage (default) / (adjustable range)	230 VAC / 200 - 241 VAC			115 VAC / 100 - 128 VAC
Frequency (default inverter mode)	50Hz, 60Hz or last synced 50/60Hz (adaptive), 94-106Hz6)
Power maximum (continuous / overload (<15s) )	1200 W (1500 VA) / 2000 VA			600 W (750 VA) / 1000 VA
Load sharing	±5% of active power from 10 to 100% load
Current maximum (continuous / overload (<15s) )	6.5 ARMS / 8.7 ARMS
Current (maximum) Quick trip (20ms)	32 A (6 x nominal)
THD	< 1.5 % at resistive load
Protection	Fuse in L, Hot pluggable, Varistor
DC OUTPUT DATA
Voltage (default) / (adjustable range)	122.5 VDC / 97 - 145 VDC
Power (maximum @nominal input)	1200 W 1)	150 W	0 W 2)	600 W 1)	75 W	0 W 2)
Current (maximum @VOUT ≤ 108 VDC)	11.11 A 1)	1.38 A	-	5.55 A 1)	0.69 A	-
Hold up time, maximum output power	>10ms; VOUT > 95 VDC (only in rectifier mode)
Current sharing (10 - 100% load)	±5% of maximum current from 10 to 100% load
Static Voltage regulation (10 - 100% load)	±0.5%
Dynamic Voltage regulation	±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Ripple	< 500 mVPP , 30 MHz bandwidth
Protection	Short circuit proof, Over voltage shutdown, Reversed polarity, ORing FET and Fuse
INPUT DATA
AC Mains Input Voltage (range / LV disconnect)	185 - 275 VAC / 170 VAC			95 - 140 VAC / 85 VAC
AC Current (maximum)	11.5 ARMS	9.1 ARMS 3)	8.2 ARMS 3)	11.3 ARMS	10.1 ARMS 3)	9.2 ARMS 3)
Frequency (default: sync range)	47-53 & 57-63 Hz			47-53 & 57-63 Hz
Frequency (set-able: sync range)	47-53 Hz, 57-63 Hz or both (adaptive)
Power Factor / THD	> 0.99 at 70% load or more / < 3.5%
AC Input Protection	Fuse in L and N, Hot pluggable, Varistor
DC Voltage nominal / extended range4)	102 - 145 VDC / 90 - 102 VDC
DC Current (maximum)	12.5 A / 18 A during overload (15s)			6.3 A / 9 A during overload (15s)
OTHER SPECIFICATION
Efficiency	>96% (mains mode), >95% (inverter mode)			>93% (mains mode), >92% (inverter mode)
Isolation	3.85 kVDC - ACIN/OUT to PE, 3.55 kVDC - ACIN/OUT to DC, 4.25 kVDC - ACIN/OUT to CAN/SYNC, 1.75 kVDC -DC to PE, 3.5 kVDC - DC to CAN/SYNC
Alarms: Red LED Alarm relay [NO max 75 VDC / 100 mA]	Low and high mains input voltage shutdown, High and low temperature shutdown, Rectiverter Failure, Overvoltage shutdown on output, Fan failure, Low output voltage alarm, CAN bus failure, Sync bus lost and Sync fail
Warnings: Yellow LED	Rectiverter in power de-rate mode or in power or current limit mode on DC or AC port, Remote output current limit activated, Loss of CAN communication with controller
Normal operation: Green LED	AC output and/or DC output on and ok
MTBF (Telcordia SR-332 Iss.I method III (a))	260 000 hours (@ Tambient : 25 °C)
Operating temperature	-40 to +75°C (-40 to +167°F), humidity 5 - 95% RH non-condensing
Temperature de-rating above 55°C (131°F)	1200W to 480W @ 75°C (167°F) for each, AC and DC, outputs (total power 2000W to 800W)
Storage temperature	-40 to +85°C (-40 to +185°F), humidity 0 - 99% RH non-condensing
Dimensions[WxHxD] / Weight	109 x 41.5 x 327mm (4.25 x 1.69 x 13”) / 1.95 kg (4.3 lbs)
DESIGN STANDARDS
Electrical safety	EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013, IEC/EN 62040-1:2008+A1:2013 UL 60950-1:2014, UL1778:2014, CSA C22.2 No. 107.3-14
EMC	EN 61000-6-1:2019, -6-2:2019, - 6-3:2007 + A1:2011, - 6-4:2019, IEC 61000-6-5:2015 EN 62040-2:2006 (C1 emissions, C2/C3 immunity), FCC CFR 47 Part 15 EN50121 -2:2017+A1:2019, -4:2016+A1:2019, -5:2017+A1:20195)
Environment	EU 2015/863 (RoHS) & 2012/19/EU (WEEE) / ETSI EN 300 019: 2-1 (Class 1.2) & 2-2 (Class 2.3) Normal operating conditions as per IEC 62040-5-3:2016 clause 4.2. Other operating conditions as per IEC 62040-5-3:2016 clause 4.3, must be advised