China Eltek Flatpack2 481500 HE SOLAR 48V1500W Rectifier 241115.650 for sale

Eltek Flatpack2 481500 HE SOLAR 48V1500W Rectifier 241115.650

Price Negotiable

Price: 330USD

MOQ: 1

Delivery Time: 1 week

Brand: Eltek

Product Description

Flatpack2 481500 HE SOLAR 48V1500W Rectifier 241115.650

With the MPPT* algorithm ensuring close to 100% panel utilization and an efficiency up to 96.5%, the galvanic isolated solar charger sets new standards for renewable power in telecom.
The combination of innovative design, efficiency and reliability makes the Flatpack2 HE SOLAR stand out.

Technical Specifications
Model	Flatpack2 48/1500 HE SOLAR
Part number	241115.650
INPUT DATA
Voltage	Nominal: 170 – 230 VDC Tolerances: 85-265 VDC
Voltage (start-up)	150 VDC
Maximum current	9.5 Arms maximum at nominal input and full load 10 Arms maximum at 85VDC and full load
Protection	Varistors for transient protection / Fuse in both lines /Reverse polarity
OUTPUT DATA
Voltage (default)	53.5 VDC Float/Boost: 48 – 57,6 VDC For input voltages > 230VDC output stand by/test voltage is limited
Maximum Output Power	1500W,derating below 170V input 800W at 85V input
Maximum current	31,3 Amps at 48 VDC
Static voltage regulation (10-100% load)	±0.5% from 10 - 100% load and supplied power not limited by PV panels
Dynamic voltage regulation	±5.0% for 10-90% or 90-10% load variation, regulation time < 50ms
Ripple	< 250 mVPP , 30 MHz bandwidth , < 2 mV rms psophometric
Protection	Overvoltage shutdown, short circuit proof, high temperature, hot plug-in inrush current limiting , Fuse
OTHER SPECIFICATIONS
Peak Efficiency	>96% at 30-80% load and 200VDC input
Isolation	3.0 KVAC – input and output 1.5 KVAC – input earth 0.5 KVDC – output earth
Alarms (Red LED)	High and low temperature shutdown, Converter Failure, Overvoltage shutdown on output, Fan failure, Low voltage alarm at 43.5V, CAN bus failure
Warnings (Yellow LED)	Low input voltage,Low temperature shutdown,Charger in power derate mode,Remote battery current limit activated,Input voltage out of range, flashing at overvoltage, Loss of CAN communication with control unit, stand alone mode
Visual indications	Green LED: ON, no faults, Yellow LED : charger warning , Red LED: charger failure
Operating temperature (5 - 95% RH non-cond.)	-40 - 75°C [-40 - 167°F ]
Storage temperature	-40 to +85°C (-40 to +185°F)
Cooling	Fan (front to back airflow)
Fan Speed	Temperature and current regulated
MTBF	> 350,000 hours Telcordia SR-332 Issue I, method III (a) (Tambient : 25°C)
Acoustic Noise	< 20dBA at nominal input and full load (Tambient <= 25°C) < 56dBA at nominal input and full load (Tambient > 40°C)
Humidity	Operating: 5% to 95% RH non-condensing , Storage: 0% to 99% RH non-condensing
Dimensions	109 x 41.5 x 327mm (W x H x D) (4.25 x 1.69 x 13”)
Weight	1.950 kg (4.3lbs)
DESIGN STANDARDS
Electrical safety	IEC 60950-1 UL 60950-1 CSA 22.2
EMC	ETSI EN 300 386 V.1.3.2 EN 61000-6-1 (immunity, light industry) EN 61000-6-2 (immunity, industry) EN 61000-6-3 (emission, light industry) EN 61000-6-4 (emission, industry)
Environment	ETSI EN 300 019-2-1 Class 1.2 ETSI EN 300 019-2-2 Class 2.3 ETSI EN 300 019-2-3 Class 3.2 ETSI EN 300 132-2 RoHS compliant