250kW/313kVA SDEC Power Diesel Generator with Denmark DEIF Controller , Power generator set

  motor generator set is a device used to convert electrical energy into another form of energy, mainly alternating current to direct current. It consists of an electric motor and a generator mechanically connected on the same shaft. Electricity is supplied to the motor. The mechanical output of the electric motor is used to rotate the generator. The type of generator depends on the application.

Generator Standard Compose:

• Meet the environmental temperature 40 ℃ water tank radiator, Driving belt cooling fans, with fan safety shield

• 12/24 V charging generators

• Generator: Single bearing generator, IP23 Grading Protection, H Insulation degree

• Shock absorber

• Dry air filter, Fuel filter, Oil filter

• Power output circuit breaker

• Standard control panel

• 12 V battery and battery connection cables

• Battery Charger

• Exhaust pipe, Bellows, Flange, Muffler set
• Documents and Manuals

Model	Standby Power		Prime Power		Model	Bore×Stroke	Engine fuel consumption	Weight	Lube Volume	Dimensions
										LxWxH)
	kVA	kW	kVA	kW		(mm)	(L/h)	(Kg)	(L)	(mm)
AS11	11	8.8	10	8	3Z1.1-G42	78x78.4	2.8	220	4	1400*620*1100
AS14	13.75	11	12.5	10	3ZT1.1-G42	78x78.4	3.6	220	4	1400*620*1100
AS17	16.5	13.2	15	12	4Z2.3-G21	85x100	4.6	440	5.5	1600*830*1200
AS23	22	17.6	20	16	4Z2.7-G21	90x105	6	520	6.5	1600*830*1200
AS28	27.5	22	25	20	4Z3.0-G21	95x105	7.4	530	6.5	1600*830*1200
AS34	34.38	27.5	31.3	25	4Z3.2-G21	98x105	8.8	530	6.5	1600*830*1200
AS44	44	35.2	40	32	4ZT3.2-G21	98x105	10.7	550	6.5	1600*830*1200
AS55	55	44	50	40	4ZT3.5-G21	98x115	12.5	570	6.5	1600*830*1200
AS69	68.75	55	62.5	50	4ZT4.1-G21	105x118	15.4	620	6.5	1600*830*1200
AS76	75.63	60.5	68.8	55	4ZTAA4.1-G21	105x118	16.4	735	6.5	1600*830*1200
AS88	88	70.4	80	64	4ZTAA4.1-G31	105x118	16.4	740	6.5	1600*830*1200
AS55	55	44	50	40	4HT4.3-G21	105×124	14.5	960	13	1750*995*1435
AS69	68.75	55	62.5	50	4HT4.3-G22	105×124	15.9	1000	13	1750*995*1435
AS88	88	70.4	80	64	4HT4.3-G23	105×124	18.3	1080	13	1750*995*1435
AS110	110	88	100	80	4HTAA4.3-G21	105×124	21.4	1123	13	1750*995*1480
AS124	123.8	99	113	90	4HTAA4.3-G23	105×124	24	1123	13	1750*995*1480
AS138	137.5	110	125	100	4HTAA4.3-G22	105×124	27.5	1123	13	1750*995*1480
AS151	151.3	121	138	110	6HTAA6.5-G21	105×124	28.7	1412	17.5	2400*1025*1535
AS165	165	132	150	120	6HTAA6.5-G22	105×124	31.2	1412	17.5	2400*1025*1535
AS206	206.3	165	188	150	6HTAA6.5-G23	105×124	41.3	1412	17.5	2400*1025*1535
AS220	220	176	200	160	6DTAA8.9-G21	114×144	42	1670	19	2500*1055*1660
AS248	247.5	198	225	180	6DTAA8.9-G24	114×144	49.3	1835	19	2600*1190*1830
AS275	275	220	250	200	6DTAA8.9-G23	114×144	54.2	1835	19	2600*1190*1830
AS344	343.8	275	313	250	6ETAA11.8-G22	128×153	62.5	2240	41	3065*1105*1626
AS385	385	308	350	280	6ETAA11.8-G21	128×153	71.6	2240	41	3065*1105*1626
AS413	412.5	330	375	300	6ETAA12.8-G22	130×161	81.2	1640	36	3065*1105*1626
AS440	440	352	400	320	6ETAA12.8-G21	130×161	85.6	1640	36	3065*1105*1626
AS440	440	352	400	320	6ETAA12.8-G32	130×161	96.1	2700	36	3100*1105*1626
AS495	495	396	450	360	6ETAA12.8-G31	130×161	99.1	2700	36	3300*1105*1626
AS550	550	440	500	400	6ETAA12.8-G310	130×161	99.1	2800	36	3400*1105*1626
AS550	550	440	500	400	6KTAA25-G311	130×161	102	4770	70	3900*1608*2109
AS619	618.8	495	563	450	6KTAA25-G310	170×185	110	4970	70	3900*1608*2109
AS688	687.5	550	625	500	6KTAA25-G39	170×185	125	5060	70	3900*1608*2109
AS770	770	616	700	560	6KTAA25-G38	170×185	139	5260	70	3900*1608*2109
AS550	550	440	500	400	6KTAA25-G36	170×185	154	4770	70	3900*1608*2109
AS619	618.8	495	563	450	6KTAA25-G35	170×185	111	5060	70	3900*1608*2109
AS688	687.5	550	625	500	6KTAA25-G34	170×185	124	5260	70	3900*1608*2109
AS770	770	616	700	560	6KTAA25-G33	170×185	136	5260	70	3900*1608*2109
AS825	825	660	750	600	6KTAA25-G32	170×185	148	5260	70	3900*1608*2109
AS990	990	792	900	720	6KTAA25-G31	170×185	163	5400	70	4191*1608*2109
AS1100	1100	880	1000	800	6KTAA25-G320	170×185	180	5800	70	4391*1608*2109
AS1238	1238	990	1125	900	6KTAA25-G321	170×185	190	5800	70	4391*1608*2109

FAQ
Q: Do you offer OEM service?
A: Yes,we improve the OEM service.
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy, Or 100% irrevocable L/C at sight.
Q: What is your lead time?
A: About 25/30 days after receiving advance deposit or original L/C.
Q: What certificates do you have?
A: We have ISO And we can apply for specific certificates for different countries such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc.
Q: What warranty do you provide?
A: One year or 1200hours’ running whichever occurs first, during the guarantee period, we will supply free of the easily damaged parts for the possible problems except for the incorrect operation. After expiration, we supply cost spare parts for Genset maintenance.