Features

■High accuracy (±2.0% F.S accuracy)
■Linear output and no temperature compensation required
■Long-term stability with minimal zero drift
■Fast response time (20 ms response time)
■The flow rate range is 0-60m/s, and the strong impact resistance is 100g
■Solid-state sensing core (no surface voids or fragile membranes), resistant to clogging and pressure shock
■Output mode: analog voltage output (1 to 5V), frequency output (2.05~11.69KHZ), two kinds of optional
■In terms of reliability, it can be adapted to the measurement of relatively humid gases
■Operating temperature: -40°C to 125°C, Storage temperature: -40°C to 125°C, humidity: 0 to 100%RH
■The sensor is resistant to condensation

Product Details

CAFS1000C series MEMS air flow sensor (i.e., air flow meter) is used in modern automotive electronic control fuel injection system (EFI), generally installed on the air intake between the air filter and the throttle body, used to measure the amount of air inhaled in the engine, and its output signal is used as the main parameter to control the amount of fuel injection in the automobile engine fuel EFI system, determines the power, economy and emission performance index of the engine. In order to obtain the best fuel concentration mixture in a variety of operating conditions, the amount of air drawn into the engine at each moment must be correctly measured and the fuel injection calculated and controlled as an electronic control unit
The main basis for the amount. Therefore, automotive air flow sensors play an extremely important role in saving energy consumption and controlling pollutant emissions in modern vehicles.
CAFS1000C series products have been verified in the automotive and related industries for many years, and have been fully able to meet the high reliability, high stability, and high reliability of automotive-grade use.
High accuracy and low cost. The application and promotion of products will be very broad.

Performance parameters