Flow Range 0-50 80 100 150 200 250 300 400SLPM Medical Flow Sensors
Product Presentation
CAFS5012E Explosion-proof gas mass flowmeter is using microelectromechanical system (MEMS) flow sensor chip, suitable for various uses of clean, relatively dry gas flow measurement and process control, unique packaging technology to satisfy the different range of flow measurement, to ensure high sensitivity, high reliability, high stability and low cost.
CAFS5012E Is based on MEMS flow sensing unit and high precision digital processing and calibration circuit (MCU). The integrated Δ - Σ A / D converter, the logic circuit with internal calibration function and MCU processor jointly guarantee the real-time effective acquisition of sensing signal, obtain accurate flow signal, and the corresponding compensation algorithm processing, without any external calibration compensation to ensure the high precision flow output; in addition, the product adds the power system, connection, port system and other protection circuits; friendly digital output communication mode, users can easily get the communication and get the corresponding data information; the product application range is very broad.
Performance Parameters Products
|
Functional items |
Flow Range 0-50 80 100 150 200 250 300 400SLPM Medical Flow Sensors |
||
| Performance parameters | unit | remark | |
| Flow range | 0-50,80,100,150,200,250,300,400 | SLPM | Customizable |
| Power supply | 8~24VDC,50mA | VDC | |
| Explosion-proof type | Ex ia IIC T6 Ga | ||
| precision | ±1.5 | %F.S. | |
| Response time | 10 ,20 ,65 ,150 (factory default 65) | ms | Customizable |
| Maximum pressure | 0.8 | MPa | Customizable |
| Output mode | Analog output 1-5, digital RS485 or I2C (optional) | VDC | |
| temperature | Medium temperature(-10~65) | ℃ | |
| Ambient temperature (-25~85) | |||
| interface | G1/2 | Customizable | |
| Calibration method | Air, 20°C, 101.325kPa | ||
| Overall material | Aluminum alloy (stainless steel can be customized) | ||
Precautions.
- Please read the manual carefully before using the product.
- The product is best used in a clean gas environment; It is not suitable for environments with a large amount of dust, oil and multiphase flow; For there are a large number of them.
- For use in a vapor environment, please contact the manufacturer in advance.
- The product is suitable for gas measurement, monitoring and control in various gas, industrial, medical, commercial, instrumentation and other industries. Others don't the use in a suitable environment should be strictly controlled.
- When using or applying this product, the corresponding relevant operating specifications and safety precautions and procedures for operators should be strictly followed.
- Wuxi Consensic Electronic Technology Co., Ltd. and its branches, subsidiaries, offices and other affiliates will not be responsible for any impropriety.
- Responsibility for damages arising from the use of this product. All other matters are subject to the sales contract. Please read the instructions carefully before using the product.
Matters Needing Attention
1.The product can only work normally in the use environment defined in this manual.
2.Attention should be paid to the gas flow mark during installation, and the connection and leakage detection should be carried out according to the corresponding regulations.
3.During the use of the product, the online installation of pipes, cleaning of pipes or other operations that may introduce a large amount of impurities may cause damage to the product.If there is water in the medium, or immersed in water may cause the decline or damage of the sensor sensitive characteristics.
4.The positive and negative electrode of the power supply will cause the internal circuit of the sensor burned out, thus affecting the use.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.