CPS125 Stress accuracy＜±0.5kpa@0℃ to50℃ Size 3×5×1.2mm

About returns and exchanges
Please confirm with our customer service first, without the permission of customer service to return the goods, our company will refuse to receive, customer service reception about return matters, in line with the return standards before acceptance, the warehouse received the return requirements, will be based on the express order to find, if the fill is not clear to be rejected processing, please carefully check the number of returns, carefully fill in the return documents, the customer clicks to buy this product, that is, agrees to the above product service agreement

Electrical Parameters

Supply Current

• Supply Current, Average (Iavg):Condition: VDD = 3V, assuming one conversion every second (either pressure or temperature measurement).Typical: 3.95 µA
• Supply Current, During Conversion (Isc):Condition: VDD = 3V, sensor active.Typical: 1.5 mA
• Supply Current, Standby (Iss):Condition: VDD = 3V, sensor in standby mode.Maximum: 0.2 µA

Analog to Digital Converter (ADC)

• Resolution (rADC): 24 bits

I2C Interface

• Clock Frequency (FC,I2C): Up to 400 kHz

Operating Conditions

Pressure Sensor

• Range: 30 to 260 kPa (300 to 2600 mbar)
• Resolution: 0.17 Pa
• Noise in Pressure: Full bandwidth, normal mode
• Accuracy:-20°C to 0°C: ±0.6 kPa;0°C to 65°C: ±0.5 kPa
• Solder Drifts: -0.1 to +0.2 kPa

Temperature Sensor

• Range: -40°C to +85°C
• Resolution: 0.003°C
• Accuracy: ±0.75°C from -40°C to +85°C

Operation

• Supply Voltage to GND: 2.0V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• I2C Pull-Up Resistors: 1 to 2.2 kΩ

Absolute Ratings

• Over Pressure: 2 times full scale (FS)
• Supply Voltage: -0.3V to 6.5V
• Voltages at Analog and Digital I/O Pins (VA_IO, VD_IO): -0.3V to VDD + 0.3V
• Storage Temperature: -60°C to +150°C