Large Size Pressed Steel Water Tank with Customized Color and B mm Range of 1106-3112
500 Cubic Meter pressed steel water tank
Galvanized Steel Water Tank
Assembled galvanized steel water tanks Q235 steel plate, pressing the formation of 1000 × 1000mm and 1000 × 500mm standard plate, the surrounding drilling, after zinc treatment, site assembly, the standard of medical silicone pad between the plate seal, bolt connection.
The product is used in building water storage, regulating water tank, heating system expansion, condensation water tank as well as the construction, geological survey, industry, national defense projects such as temporary water storage tanks.
The pipe diameter of Water tank inlet, outlet, overflow and location are due to the design decisions; the channel around water tank should be at least 700mm, floor and roof of water tank no less than 600mm.
Anti-corrosion: Body and attachment of water tanks are used galvanized.
Testing: Installed the water tank, close the outlet and the vent pipes, open the inlet, let the water into the water tank, filled up, after 2-3 hours without leakage, it qualified.
1. The standard:
The hot dipped galvanized steel water tank is a new type water tank manufactured according to the GB:2SS177.
2.The HDG steel plate of the water tank:
1) The plate is press by the special equipment, the surface is smooth, and the concave shape of the plate is good for reduce the pressure of the water pressed to the plate.
2) This plate is made of Q235 steel.
3)The thickness: 3mm,2.5mm,2mm,1.5mm it is different according the size of the tank.
4) The size of the hot dip galvanized steel plate: 1000mm*1000mm, 1000mm*500mm, 500mm*500mm.
5) The size of the water tank, it can be design according the size of the location place, the tallest height is 5meters.
3.The installment of the hot dip galvanized water tank.
1) Make the bases of the water tank: concrete base or steel support tower.
Make sure the bases at the same horizontal level, and the connection of the bottom plate loaded on the support bases.
2) According to the direction of the water tank, welding connection, or connect by the bolts and nuts.
3) After assembled, put in water to test the leakage. After fill full water 12hours, if not leakage, the water tank can be used normally.
Certificate
Factory pictures
What you need is Best Shuangyi Water Tank
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.