Wall Mounted Solar Combiner Box IP65 2P 3P 4P Over Voltage Protection HLX-DC
HLX-DC Solar Combiner Box IP65 Wall-mounted 2P 3P 4P Over-voltage Protection
Summarize
The photovoltaic junction box is used in the photovoltaic power generation system to reduce the connection line between the photovoltaic module and the inverter. Through the protection of photovoltaic special fuses.circuit breakers and lightning protectors, the reliability is improved, and the maintenance of the system is convenient. Users can according to the inverter input DC voltage range, a certain number of specifications of the same photovoltaic modules in series to form a photovoltaic module series, and then a number of series connected to the phatovoltaic array lightning busbar, through the lightning arrester and circuit breaker protection output, convenient access to the post-inverter.
Main technical parameters
| Item | HLX-DC |
| Electrical parameter | |
| System DC voltage V | 250/500/750/1000/1500 |
| Each input current | 10A--30A |
| Input path number | 2-24Road |
| Maximum output switching current | 20A-630A |
| Output path | 1/2/3/4/5/6 |
| Lightning protection | |
| Test class | Ⅱ pole protection |
| Nominal discharge current | 20kA |
| Maximum discharge current | 40kA |
| Voltage protection level | 3.8kV |
| Maximum continuous operating voltage | 1500V |
| Number of poles | 2P,3P,4P |
| Structural characteristics | Pluggable module |
| System | |
| Class of protection | IP65 |
| Output switch | Dc Circuit breaker (standard)/DC Rotary isolating Switch(optional) |
| MC4/Waterproof connector | assorting |
| Photovoltaic DC fuse | Standard configuration |
| Photovoltaic direct surge protector | Standard configuration |
| Monitoring module | optional |
| Anti-reflex diode | optional |
| Box material | Cold-tied steel/Spray Stainless/Steel/Glass steel(SMC)/Plastic Box(ABS) |
| Installation mode | wall-mounted |
| Operating temperature | -25℃-+55℃ |
| Altitude | 2000m |
| Allowable relative humidity | 0~95%,no condensation |
Main feature
●The cabinet is made of hot-dip galvanized steel plate, the structure of the cabinet is safe and reliable, and has enough mechanical strength to ensure that the components are not shaken or deformed after installation and operation.
●Protection class IP65, with waterproof, ash, rust, salt spray, to meet the requirements of outdoor installation; Up to 24 photovoltaic arrays can be accessed simultaneously;
●The positive and negative poles of each battery series are equipped with photovoltaic fuses for protection, and the fuse base and fuse are used together to reduce the owner's later maintenance costs and effectively protect the personal safety of maintenance personnel;
●The DC output bus is equipped with photovoltaic lightning arrester. It has good surge protection function between positive electrode and ground, negative electrode and negative electrode
●The bus box is equipped with a modular intelligent detection unit to detect the current, output voltage, box temperature, lightning arrester status,circuit breaker status of each series of components;
●Intelligent detection unit with digital display function, can display current, voltage, power, temperature, equipment address, equipment number and other information on the device body; The power consumption of the modular bus box intelligent detection unit is less than 4W, and the measurement accuracy is 0.5%.
● With a variety of ways of data remote transmission, provide RS485interface and wireless ZigBee interface, and the communication interface built-in lightning protection function, effectively protect the equipment communication port;
●The intelligent detection unit of the modular bus box adopts DC 1000V/1500V self-powered mode, and the self-powered power supply adopts modular glue-filling package. The power supply has the functions of anti-reverse connection, over-current, over-voltage protection, anti-corrosion, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.