40TON heavy duty excavator attachment VIBRATING RIPPER Germany technology

An excavator can easily be turned into a sheet pile driver by connecting a Vibratory Hammer.
The excavator supplies the oil flow for the hammer and the force of the excavator boom is used to raise the penetration rate of the steel. Occasionally these joint forces means a smaller hammer can be used.
Maximum variety, minimum disturbance
Our Excavator Mounted Vibratory Hammers are used to drive or extract various steel profiles; sheet piles, H-beams, and I-beams and the bigger types, fitted with double clamps, casings and tubular piles, can be driven. The Vibro Hammers have a very narrow throat width that allows you to carry out staggered sheet piling, and with a wide range of Vibratory Hammers and clamps, we have the solution for all types of steel, wood and concrete piles and all different soil conditions.
Swivel Head – Side Gripper
A swivel head is a real time-saver for pile-driving jobs. The manual interference is reduced by picking up a sheet pile in a horizontal position with a 90-degree tilting function. So almost nonstop piling operation is possible, and the operator can drive a sheet pile in less cycle time than the standard type pile driver. Our Side Gripper can rotate and tilt and, in the 90-degree tilted position, can also pick up a profile in a horizontal position.
The excavator-mounted series causes minimal ground vibrations due to its high rotational speed of approximately 2300 rpm. An additional range of Variable Moment / Resonance Free models allows you to drive steel piles with less disturbance on vibration-sensitive projects. Due to the excavator mounting, their extreme flexibility makes this kind of Vibratory Hammer our most agile equipment – especially in compact spaces.