Characteristics:

Scientific structure, high efficient, frost evenly, save power and bw running cost;

Match with axial fan quiet models that offer strong air flow in long shot rang;power saving, long life cycle;

Lead to perfect tightness between pipe and fin after expansion processing;

Match with stainless electric heater in high insulating property, defrost efficiently in shot time;

The heat exchanging coil pass gas tightness test up to 2.6MPa air pressure;

Aluminum and painted stan board, to meet your different demands.

Sphere of application

High temperature type:

(cold room temperature 12~- 2ºC)fin space:4.5mm;

Medium temperature type:

(cold room temperature-2 ~- 10ºC) fin space:6.0mm;

Low temperature type:

(cold room temperature - 10~-31ºC)fn space:9.0mm;

→Tailor-made for customers

How to select right unit cooler model according to selected compressor rating condition refrigerating capacity

1 )When the cold room temperature is around 0ºC,select unit cooler as Q.×1.0;

2)When the cold room temperature is around -18ºC,select unit cooler as Q.× 1.1;

3)When the cold room temperature is lower than -25ºC, select unit cooler as Q.×1.27;

When using R134a as refrigerant, please enlarge Q. (refrigerant capacity) 10%~15%when you selecting unit cooler.z 

Parameter table: 

1) Air cooler series products of sheet metal parts all use hydraulic or hydraulic punch one-time punched,appearance,structure strength of products.

2) Sheet metal parts are crimped aluminum and spray plate,stainless steel plate three,users can choose according to need.

3)By insulating U tubular electrothermal strong pipe,electric heating pipe is inserted inside the coil,defrosting time is short,the effect is good,also can be selected as required water defrosting and hot Freon defrosting.

4) Coil adopts a thick copper pipes ,improving the service life of aluminum sheet ,aluminum sheet with high rise tube and the copper tube,through close contact,the effect of heat transfer increase to reach the pole.

5) Using high efficiency fan,air volume,far range,low noise,and low power consumption,long service life,high reliability.

6)Products manufactured before all through the holding pressure filling nitrogen.

Packing details:

The normal package is wooden box(Size: L*W*H). If export to european countries,the wooden box will be fumigated.If container is too tigher,we will use pe film for packing or pack it according to customers special request.

Company Profile:

Zhejiang Damai Refrigeration Technology Co., Ltd is located in Shaoxin,Zhejiang.Damai is a company specializing in refrigeration and air conditioning equipment.Our main equipment is Cold room,Evaporator,Condenser,Condensing unit,Compressor,Cold room panel/door and so on.We have more than ten years of experience in the field of cold storage, with high-quality technology and professional product knowledge.We are able to provide consumers with professional and high-quality technical services.The quality of our products can be guaranteed.