Professional Lightning Protection System with Different Sizes and Specifications
Professional Lightning Protection System
| Material | Copper or Brass or Copper Clad Steel or Stainless Steel |
| Service life | More than 50 Years |
| Characters | Characters |
| Available service mode | OEM,ODM |
| Certificate | ISO9001:2015 |
Negotiable Price According to different material/size and and Purchase quantity
| Description | Common Size(We accept customization) |
| Ball | Dia58mm |
| Base | 100mmx100mmx3mm |
| Total Height | 380mm |
| Rod Length | Rod diameter | Thread | Material |
| 500mm | 16mm | M16 | Brass,copper |
| 1000mm | 16mm | M16 | Brass,copper |
| 1500mm | 16mm | M16 | Brass,copperl |
| Avaible Dia:8mm-25mm; Length:300mm-2000mm | |||
| Base | Conductor size | Rod diamter | Material |
| 1 | 50-95mm²wire | 16mm | Brass |
| 2 | 25mmx3mm copper tape | 16mm | Brass |
| Three Point Needle | Nos | Rod | Material |
| 1 | 3 | 16mm | Brass,copper |
Lightning arrester is used for lightning system of power plant ,transformer station ,tower ,communication station ,airport,railway, subway station , high building ,computer room ,petro plant ,oil reservoir in the environmental of moist ,saline and alkaline ,acid and chemical corrosion medium environmental.
Matters need attention during installation:
(1)The lightning rod and other metal part on the building should connected together;
(2)No low voltage cable or communication cable installed on the rod
(B)Installation of earthing tape and earthing grid
1. Installation of exposed earthing tape (grid) :Installed at the ridge ,eave(abat-vent) or edge of roof
(1)Installation at the concrete base of roof :The base can be made with the roof together ,and fixed to the roof.
(2) Installation on the parapet wall or gutter bracket
Installed along parapet wall and fixed with bracket ,and the bracket should be installed earlier .The working height of bracket
should be less than 150mm . The bracket for direct line should be first and then for the middle .The bracket should be 0.25-0.5m
away to the turning point if turning needed . The horizontal spacing of bracket is 1-1.5m ,and vertical interval is 1.5-2m and
even distribution
(3) Installation at ridge ,eave or edge of roof
Use concrete base or bracke
If make the base on site , please remove the corner of ridge tile first ,and make the bracket and ridge tile together;
The bracket should be 0.25-0.5m away to the turning point if turning needed . The horizontal spacing of bracket is 1-1.5m ,and
vertical interval is 1.5-2m and even distribution.
Packaging Details Lightning Protection System packing: cartons+wooden cases+pallet+container
Lead time:
| Quantity(pieces) | 1 - 50 | 51 - 1000 | >1000 |
| Lead time (days) | 10 | 30 | To be negotiated |
Terminal Bolck Steel Mounting DIN Rails Surface Mounted Franch Type 2gang Switch 1gan Socke Switch Socke Waterproof
1.Are you a trading company or manufacturer?
Manufacturer with factory!
2.What kinds of Grounding Material do you produce?
It covers grounding rod ,lightning rod ,connecting fixing ,conductor, exothermic welding kit, etc.
3.Is Customized Material available?
Yes, please offer your required specs.
4.Do you Accept OEM service?
YES!
5.What's your Delivery Time?
Normally 20-25days,please confirm with us before order!
6.What's the Payment Trems?
Usually,50% as deposit,50% before sending B/L by T/T.
7.How you pack products?
Normally, in steel pallet. We'll do according to customers' requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.