ADSS Fiber Optic Cable 6-144 Core Single Mode Aerial Installation
| Attribute | Value |
|---|---|
| Type | ADSS optical cable-12b1.3 |
| Fiber Type | Single-mode |
| Fiber Count | 6/12/24/36/48/72/144 |
| Outer Sheath | Black PE |
| Inner Sheath Material | PE |
| Installation Method | Aerial |
| Strength Member Material | FRP/ARMID YARN |
| Cable Diameter | 12.5mm |
ADSS (Aerial Drop Submarine) Fiber Optic Cable is a type of optical fiber cable designed for installation in overhead environments, typically between transmission towers or along utility poles. It is widely used for telecommunication, data transmission, and networking in both urban and rural areas.
ADSS cables are typically used in telecommunications, power grid communications, and other areas where reliable and high-capacity fiber optic networks are needed over long distances.
- High tensile strength
- All dielectric structure and semi-dry core design
- Small diameter and light weight
- Self-supporting aerial installation
| Fiber count | Structure | Fibers per tube | Loose tube diameter (mm) | CSM diameter/pad diameter (mm) | Nominal Thickness of outer jacket (mm) | Cable diameter/ Height (mm) | Cable weight (kg/km) |
|---|---|---|---|---|---|---|---|
| 4 | 1+6 | 4 | 1.9±0.1 | 2.0/2.0 | 1.6 | 9.5±0.2 | 80 |
| 6 | 1+6 | 6 | 2.0±0.1 | 2.0/2.0 | 1.6 | 9.8±0.3 | 80 |
| 8 | 1+6 | 4 | 1.9±0.1 | 2.0/2.0 | 1.6 | 9.8±0.3 | 80 |
| 12 | 1+6 | 6 | 2.1±0.1 | 2.0/2.0 | 1.6 | 9.8±0.3 | 80 |
| 24 | 1+6 | 12 | 2.1±0.1 | 2.0/2.0 | 1.6 | 9.8±0.3 | 80 |
| 36 | 1+6 | 12 | 2.2±0.1 | 2.0/2.0 | 1.6 | 10.0±0.3 | 85 |
| 48 | 1+6 | 12 | 2.2±0.1 | 2.0/2.0 | 1.6 | 10.0±0.3 | 85 |
| 72 | 1+6 | 12 | 2.2±0.1 | 2.0/2.0 | 1.6 | 10.0±0.3 | 85 |
| 96 | 1+8 | 12 | 2.2±0.1 | 2.0/3.4 | 1.7 | 11.8±0.3 | 123 |
| 144 | 1+12 | 12 | 2.2±0.1 | 3.0/6.2 | 1.7 | 14.5±0.3 | 175 |
| No. | Items | Unit | Specification |
|---|---|---|---|
| 1 | Mode Field Diameter (1310nm) | μm | 9.2±0.4 |
| Mode Field Diameter (1550nm) | μm | 10.4±0.8 | |
| 2 | Cladding Diameter | μm | 125.0±1.0 |
| 3 | Cladding Non-Circularity | % | ≤1.0 |
| 4 | Core-Cladding Concentricity Error | μm | ≤0.5 |
| 5 | Coating Diameter | μm | 245±5 |
| 6 | Coating Non-Circularity | % | ≤6.0 |
| 7 | Cladding-Coating Concentricity Error | μm | ≤12.0 |
| 8 | Cable Cutoff Wavelength | nm | λcc≤1260 |
| 9 | Attenuation(max.) (1310nm) | dB/km | ≤0.35 |
| Attenuation(max.) (1550nm) | dB/km | ≤0.21 | |
| Attenuation(max.) (1380nm) | dB/km | ≤0.35 | |
| Attenuation(max.) (1625nm) | dB/km | ≤0.24 | |
| 10 | Attenuation and wavelength (1310nm 1285-1330nm) | dB/km | ≤0.04 |
| Attenuation and wavelength (1550nm 1525-1575nm) | dB/km | ≤0.03 | |
| Attenuation and wavelength (1550nm 1480-1580nm) | dB/km | ≤0.05 | |
| 11 | Dispersion (1288-1339nm) | ps/(nm.km) | ≥-3.5, ≤3.5 |
| Dispersion (1271-1360nm) | ps/(nm.km) | ≥-5.3, ≤5.3 | |
| Dispersion (1480-1580nm) | ps/(nm.km) | ≤20 | |
| Dispersion (1550nm) | ps/(nm.km) | ≤18 | |
| 12 | Zero dispersion wavelength | Nm | 1300-1324 |
| 13 | Zero dispersion slope | ps/(nm2•km) | ≤0.092 |
| 14 | Typical value | ps/(nm2•km) | 0.04 |
| 15 | Largest individual fiber | Ps/√ km | 0.2 |
| 16 | Link design values | Ps/√ km | 0.1 |
| 17 | Two way average (1310nm-1550) | ≤0.01dB |
Construction: This type features a single outer jacket layer. Lightweight: It's typically lighter than double sheath variants.
Applications: Ideal for environments with lower risk of mechanical damage or where cable weight is a critical factor.
Cost-Efficient: Generally more cost-effective due to less material usage.
Environmental Resistance: Offers sufficient protection against UV rays, moisture, and minor abrasions.
Construction: Equipped with two layers of sheathing, an inner and an outer jacket.
Enhanced Protection: Provides better mechanical protection, making it suitable for harsher environments.
Durability: More resistant to abrasion, rodents, and other forms of physical damage.
Weight and Cost: Heavier and typically more expensive than single sheath cables due to additional materials.
Applications: Preferred in areas with higher potential for mechanical stress, such as regions with dense vegetation or frequent severe weather.
- Send your purchase intention to our email: cotton@fibercablepuls.com
- Our sales team will contact you to confirm the product specification, packaging, printing, quantity, and other specific information.
- Sign the contract or Proforma Invoice.
- After receiving your deposit, we will start to arrange the production.
- 2 weeks before the completion of production, we will notify you to start contacting shipping.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.