High-pressure pump mist gun sprayer for construction

The science of the fog gun machine is called "fog gun", "gun fog machine" and "fog injector",

which can be directly installed in the back of the sprinkler car, can atomize into a bead

equivalent to dust through pressure, and under the fan, the fog is accurately thrown to the

target, covering the product, and the dust below 200 micro has complete inhibition energy,

at the same time, the amount can be adjusted according to actual needs. Compared with the

ordinary sprinkler, it can save 50%, and raise the resource interest rate, the ordinary sprinkler

is only sprayed along the nozzle to inhibit the road dust, and can not effectively and quickly

solve the dust in the air.
The role of the fog cannon is not only to purify the air, but also to wet the surface of the

environment. It has become a very effective solution and is widely used in areas suffering from

dust, air pollution and other problems. The fog cannon machine sends water into the nozzle

through a high-pressure pump, and the nozzle uses high-speed airflow to mist the water into

small droplets, forming a dense water mist. The spray distance and Angle can be adjusted

according to needs, usually tens of meters or even hundreds of meters of spray distance, to

ensure the maximum coverage area. At the same time, the nozzle Angle can also be adjusted

to meet the needs of different working environments, such as fixed Angle spraying and

adjustable Angle spraying. In addition, the fog cannon can also control the particle size and

concentration of water mist by adjusting the pressure and nozzle aperture to achieve accurate

control of the atomization effect.

type	Flow rate (L/s)	Water range (≥m)	Foam range (≥m)	Rated pressure (Mpa)	Pitch Angle	Horizontal Angle	Connecting flange
PLKD8/24G	24	55	42	0.8	-60°—+90°	360°	DN65
PLKD8/32G	32	60	48	0.8	-60°—+90°	360°	DN65
PLKD8/48G	48	65	60	0.8	-60°—+90°	360°	DN65
PLKD10/64G	64	75	70	1.0	-60°—+90°	360°	DN65
PLKD10/80G	80	85	80	1.0	-60°—+90°	360°	DN100
PLKD10/100G	100	90	85	1.0	-60°—+90°	360°	DN100
PLKD10/120G	120	90	90	1.0	-60°—+90°	360°	DN100
PLKD12/150G	150	100	95	1.2	-60°—+90°	360°	DN150
PLKD12/180G	180	105	100	1.2	-60°—+90°	360°	DN200
PLKD12/200G	200	110	105	1.2	-60°—+90°	360°	DN200