GROW K215-V1.3+R503 Fingerprint Access Control System With Fingerprint Module for Car
K215-V1.3 Technical Parameters
·Power supply: DC10--30V,·Stand-by current for control board: 40mA
·Fingerprint capacity: 200
·Size: 36.4*70mm
·Relay Function: Self-locking or 1-20 second
K215-V1.3 Operation Instruction
1. Press SET button shortly,system in register state and blue indicator light flash fast, place your finger in the collection area, fingerprint register successful when hearing music;Fingerprint can be registered continuously when system in register state; if no need adding fingerprint more, waiting a few seconds.
2. When back to factory default, press SET button until hear "Di" and music,means initialization operation successful.
3. Mode Selection Usage: when chose 2, operating time of the relay is 1s-20s after pass fingerprint,can adjust by knob. When chose 1, relay operated when fingerprint passed, and then relay released when fingerprint passed again, relay operated and released circularly. Relay released when power off.
Note:
In factory status, any fingerprint can pass, after register fingerprints, this function is invalid;
Set sleep mode, long press (about 10s) the SET button and do not release your finger until hearing the "DiDiDi" sound and the music,means initialization operation successful.
K215-V1.3 has a wide range of use, which can be used in automobile control, access control and other occasions.
K215-V1.3 can be connected with R502-A,R502-AW,R502-F,R503,R503-M22 fingerprint module.
R503 Specifications
| Model | R503 |
| Type | Capacitive Fingerprint Module |
| Interface | UART(TTL) |
| Resolution | 508 DPI |
| Voltage | DC 3.3V |
| Fingerprint Capacity | 200 |
| Sensing array | 192*192 pixel |
| Working current | 20mA |
| Standby current | Typical touch standby voltage: 3.3V, Average current: 2uA |
| Fingerprint module external size | Diameter 28 (mm) |
| Fingerprint module inner size | Diameter 23.5 (mm) |
| Fingerprint module height | 19 (mm) |
| Effective collection area | Diameter 15.5 (mm) |
| Connector | SH1.0-6Pin |
| LED Control | YES |
| LED Color | RGB |
| Scanning Speed | < 0.2 second |
| Verification Speed | < 0.3 second |
| Matching Method | 1:1; 1:N |
| FRR | ≤1% |
| FAR | ≤0.001% |
| Work environment | -20C ---60C |
| Work Humidity | 10-85% |
| Anti-static capacity | 15KV |
| Abrasive resistance intensity | 1 million times |
| Communications baud rate (UART): | (9600 × N) bps where N = 1 ~ 12(default N = 6, ie 57600bps) |
Files
·Provide Free Reference SDK Files for Arduino, Android,.Net,Windows and so on.·Provide User Manual
K215-V1.2 Test video on Youtube: https://youtu.be/bRQP0JuzqYo
If need SDK files.Pls contact us.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.