DZ97189715408 Chassis Ride Height Sensor Leveling Sensor For Shacman Delong X6000 X5000 X3000 M3000 Truck Chassis System
-
Real-time Detection: The shacman delong X6000 X5000 X3000 M3000 truck spare parts leveling sensor is installed between the chassis frame and the axle to monitor changes in height between them. It converts mechanical displacement into electrical signals and transmits them to the ECAS control unit.
-
Automatic Adjustment: The ECU compares feedback data against the preset standard height. When the actual height deviates from the set value, the ECAS controls solenoid valves to inflate or deflate the air springs, thereby restoring the vehicle to its normal height.
-
Sensitive Response: The DZ97189715408 chassis ride height sensor continuously monitors the relative position between the frame and the axle, placing high demands on the reliability of its internal sensing mechanism and the linkage structure of the actuating arm.
- Driving Stability: The DZ97189715408 leveling sensor addresses height fluctuations that occur under varying load conditions from empty to fully loaded and diverse road surfaces. Maintaining the preset vehicle height helps improve vehicle stability and optimizes suspension performance.
| Product Name |
DZ97189715408 Chassis Ride Height Sensor Leveling Sensor |
Finish | Smooth plastic housing finish |
| Part Number | DZ97189715408 | Type of Attachment |
Flange bolt‑on mounting |
| Type | Knock Sensor | Color | Black |
| Supply Ability | 34241PCS | Single package size | 20X10X15 cm |
| Application | Shacman Delong X6000 X5000 X3000 M3000 Truck | Single gross weight | 1.0 kg |
| Material |
plastic rubber |
Placement | On cab air‑suspension bracket |
| Shape | Flange‑base housing | Form | Hall‑effect one‑piece sensor assembly |
| No. | Part Number | Applicable Models | Products Name |
| 1 | DZ95189711200 4410501200 | Shacman Delong | Height Sensor |
| 2 | DZ97189715402 | ||
| 3 | 4410500110 | Yu-tong bus | |
| 4 | DZ93189552071 | Shacman delong | Tank Fuel Level Sensor |
| 5 | G2100-3823140 | Boost Pressure Sensor | |
| 6 | G2100-3823170 | Crankshaft Position Sensor | |
| 7 | 612600911022 0261230133 | FAW | Intake Air Temperature Sensor |
Product and Packaging
- Compatibility:Designed for Shacman Delong heavy-duty trucks such as the X6000, X5000 and X3000 series equipped with air suspension; it serves the electronically controlled air suspension ECAS system by transmitting real-time height signals to the ECAS control unit.
- Direct Replacement:It serves as a direct replacement for the original part in cases of issues such as incorrect cab height too high or too low, seized linkage arms, internal chip failure, water ingress or oxidation at the connector, poor wiring harness contact, continuous inflation/deflation of air bellows, signal drift or broken/detached linkage arms.
- Packaging: carton packing and wooden box packing.For example:
Maintenance Points
-
Before installation or removal, disconnect the negative battery terminal to prevent short-circuit damage to the electronic control module; verify that the linkage arm angle of the new sensor matches the old one and ensure the arm is free from deformation or cracks.
-
Tighten bolts evenly in a diagonal pattern to avoid cracking the plastic base due to excessive force; ensure the connector is fully seated and locked and apply proper waterproofing measures.
-
The installation angle of the linkage arm must match the original factory position; don't force the arm to bend.
-
After installation, use a diagnostic tool to clear fault codes and perform height calibration/learning, then conduct a road test to verify the height adjustment function.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.