Hydraulic Cylinder Seal Car Oil Seals Sb Rubber Sealings Wear And Oil Resistance
Hydraulic Cylinder Seal Car Oil Seals Sb Rubber Sealings Wear And Oil Resistance
SB type oil seal has the following characteristics:
The outer layer is an iron shell, designed for steel rotating shafts or cast iron pool holes. For sealing, single lip with spring, low coefficient of friction, pressure resistance about 0.03Mpa.
The exposed iron housing and double lip design complement each other. The sturdy iron housing provides stable support, while the lip fits tightly on the shaft surface and the built-in spring ensures consistent sealing effect. With these advantages, SB type oil seals are widely used in construction machinery, chemical equipment and other fields.
The oil seal with outer iron shell has the following advantages:
- Good rigidity: compared with other types of oil seals, the iron shell of the outer skeleton oil seal provides better rigid support and is less likely to be deformed during installation and use.
- Easy to install: the existence of iron shell makes the oil seal easier to locate and operate during installation, which improves the convenience and efficiency of installation.
- Safe to use: Due to its stable structure and reliable installation, it reduces the probability of equipment failure and accidents and guarantees the safety of equipment and personnel.
- Good thermal conductivity and heat dissipation: the iron shell has good thermal conductivity, which can promptly dissipate the heat generated by the oil seal in the working process, reduce the working temperature of the oil seal, reduce the rubber aging and sealing performance degradation caused by high temperature, and prolong the service life of the oil seal.
Size
| Number | Specifications | Number | Specifications |
| 1 | 20*40*11 | 28 | 150*180*14 |
| 2 | 28*45*8 | 29 | 160*190*14 |
| 3 | 38*58*11 | 30 | 160*190*16 |
| 4 | 40*62*9 | 31 | 165*220*20 |
| 5 | 42*55*7 | 32 | 170*200*15 |
| 6 | 45*68*12 | 33 | 170*200*16 |
| 7 | 50*72*12 | 34 | 180*210*15 |
| 8 | 55*78*12 | 35 | 180*210*16 |
| 9 | 60*80*8 | 36 | 180*235*20 |
| 10 | 60*80*10 | 37 | 190*220*15 |
| 11 | 65*90*13 | 38 | 190*225*16 |
| 12 | 75*100*13 | 39 | 200*230*15 |
| 13 | 80*105*13 | 40 | 200*230*16 |
| 14 | 90*115*13 | 41 | 200*240*20 |
| 15 | 95*120*13 | 42 | 210*240*15 |
| 16 | 100*125*13 | 43 | 210*250*16 |
| 17 | 95*130*13 | 44 | 210*250*20 |
| 18 | 105*135*14 | 45 | 220*255*16 |
| 19 | 110*140*14 | 46 | 220*260*22 |
| 20 | 115*145*14 | 47 | 230*260*15 |
| 21 | 120*150*14 | 48 | 240*270*15 |
| 22 | 125*155*14 | 49 | 240*280*19 |
| 23 | 130*160*14 | 50 | 250*280*15 |
| 24 | 135*165*14 | 51 | 270*330*25 |
| 25 | 135*170*12 | 52 | 280*320*18 |
| 26 | 140*170*14 | 53 | 320*360*25 |
| 27 | 145*175*14 | 54 | 365*405*18 |
Details Images
Product Packaging
Factory
Company Introduction
|
Hebei Xiangte Seal Technology Co., Ltd. is located in Hebei Province, China, with rich experience in the research and development, production and sales of seals.
The company is committed to research and development and solve the problem of sealing and shock absorption of high-end products.
Focusing on FKM, NBR special rubber seals and high-performance polyurethane products production and research and development, our company has developed special NBR gray rubber, FKM rubber after many years of experimentation and research , and its resistance to high and low temperatures and a variety of physical properties of the index is far more than the ordinary NBR rubber, the performance is stable and reliable.
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.