Customizable Burn-In Test Facility for EV On-Board Charger with 35kW Total Input Power and 16 Burn-In Bits per Cabinet
Price:
8800dollars/set
MOQ:
2sets
Delivery Time:
40 work days
Brand:
CPET
Product Description
Customization Burn In Test Facility Of EV Integrated On Board Charger
Burn-In Test Facility Of EV Integrated On-Board Charger Support Customization
Scope of Application
Used for aging test of hybrid vehicles, electric vehicles, electric buses, DC-DC converters for new energy vehicles On-Board Charger (OBC), etc.
Architecture Diagram
Performance Parameters
| System | System structure | 1 control cabinet + 2 aging cabinets + 1 water temperature cabinet |
|---|---|
| Overall size | 6900*1600*2050mm |
| Total floor area | 6900*2500mm (Including operation area) |
| Total input voltage | Three-phase five-wire system 220Vac (rated) |
| Total input current | 100A |
| Total input power | 35kW |
| Application ambient temperature | 0-40℃ |
| Application environment humidity | 0-95% |
| Fire protection requirements | Materials meet UL 94V0 rating |
| Environmental requirements | Materials comply with Rohs, WEEE requirements |
| Safety requirements | Comply with IEC62368 international standard design requirements |
Burn-in Cabinet Specifications
| Burn-in bits/cabinet | 16 bits/cabinet |
|---|---|
| Burn-in bits/layer | 4 bits/layer |
| Burn-in product power | 7.5kW/bit |
| Burn-in product input voltage | 50-800Vdc |
| Burn-in product input current | 25A/bit |
| Low-voltage power of Burn-in products | 3.2kW/bit |
| Low voltage voltage of Burn-in products | 8-30V |
| Burn-in product battery current | 240A/bit |
| Burn-in product AC power | 7kW/bit |
| Burn-in products AC voltage | 220/380Vac/50Hz three-phase five-wire |
| Burn-in product AC current | 32A/bit |
| AC Connector Type | PA45 (L1 / L2/ L3/N/PE) |
| Power Connector Type | SB50 (HV+/HV-) |
| Low Voltage Connector Type | SB350 (LV+/LV-) |
| Signal Connector Type | 24Pin 5566 |
| Input power | 130kW |
| Feedback power | 100kW |
| Constant temperature range | Room temperature+5°C-60°C |
| Constant temperature accuracy | ±5°C |
| Number of temperature control points | 5 |
| Open type | Sliding door/folding door/side door |
| Volume size | 2100*1600*2050mm |
| Dimensions in the product area | 1700*550*1500mm |
| Product area layers | 4 |
| Bit space size | 425*550*350mm |
| Minimum floor height | 300mm |
| Top floor height | 1450mm |
| Product area air duct direction | Left and right ventilation |
| Cooling method | Air cooling |
| Material | 1.5mm cold rolled sheet, epoxy sheet (laminate) |
Water Temperature Cabinet Specifications
| Water temperature range | Room temperature+5°C-60°C |
|---|---|
| Water temperature accuracy | ±5°C |
| Water temperature | 8 |
| Number of serial products/way | 4/way |
| Dissipated power/circuit | 4kW/way |
| Cooling method | Chilled water or air cooling |
| Water pressure range | 0.05-0.2MPa |
| Flow range | 3-15L/min |
| Channel diameter | 3/4 inch |
| Volume size | 880*1000*1900mm |
Monitoring Software Features
- Display running information: Input voltage, current, power, output voltage (DC source module communication or product communication)
- Show status information: Not Connected / Vacant / Passed / Under Voltage / Under Current / Over Voltage / Over Current / No Output / Protection
- Display accuracy: ±(1%+0.2%FS)
- Control precision: ±(1%+0.2%FS)
- Bad way of reporting: Audible alarm
- Report format: CSV format
- Statistics: Yield/CPK/Time Distribution
- MES docking: Support
- Scan speed: 5S
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen CPET Electronics Co., Ltd.
Location
Building 1, No. 33, Patang Road, Loucun Community, Guangming District, Shenzhen, China XinHu Street,Guangming District, Shenzhen, China
Contact Person
Umiya