512-bit Portable Power Bank Aging Test Equipment with 30W/CH Capacity and 8 Floors Double-sided Operation
Price:
¥39500
MOQ:
1
Delivery Time:
30 work days
Brand:
CPET
Product Description
Manufacturer Of 512-bit Portable Power Bank Charge And Discharge Aging Test Equipment
Professional 512-bit portable power bank charge and discharge aging test equipment designed for comprehensive testing of mobile power banks.
Scope of Application
Suitable for testing mobile power banks of various capacities and specifications.
Outstanding Functions
- Software-controlled load parameters with real-time monitoring of voltage, current, and power
- Comprehensive charging status monitoring including voltage, current, and power measurements
- CC (Constant Current) and CV (Constant Voltage) load modes
- Channel parallel connection capability in CC mode for power expansion
- Built-in over-temperature and smoke alarm protection systems
- Editable switching timing and load conversion functionality
Performance Parameters
1. Appearance and Structure of the Aging Trolley
| Parameter | Specification |
|---|---|
| Trolley size | L2050 * W880 * H1900mm (Double-sided operation) |
| Number of levels | 8 floors (Customizable) |
| Trolley height | 150mm |
| Material | Cold-rolled steel plates with industrial design |
| Heat dissipation | Top turbine exhaust fan with upper exhaust type |
| Interlayer insulation | Epoxy insulating board with heat dissipation holes |
| Structural form | Dual-sided operation with isolated test and load areas |
| Door structure | Aluminum alloy visible sliding door with folding glass |
| Special features | Flip structure on 4th/5th floors, spacious ground floor for easy loading |
2. Electronic Load Module Configuration
| Parameter | Specification |
|---|---|
| Control mode | RS485/RS232 communication |
| Single-channel parameters | Charging: 2-30V/0.2-5A/30W, Discharging: 0.5-5A/30W |
| Isolation mode | Photoelectric isolation for communication and power supply |
| Load modules installed | 64 units (8 per floor * 8 floors) |
| Loading mode | CC/CV mode with parallel channel capability |
| Design architecture | No electrolytic capacitors or relays, long-life design |
| Channels per module | 8CH |
| Rated power | 30W/CH (for power supplies below 30W) |
| Aged products capacity | 512 bits (double-sided) for ≤30W power supplies |
| Fast charging support | PD2.0/3.0, QC2.0/3.0/4.0 protocols with upgrade capability |
| Charging monitoring | One-to-one voltage/current/capacity control with auto cutoff |
| Discharge monitoring | Voltage/current/capacity monitoring with auto discharge/cutoff |
3. Electronic Control and Temperature Control
| Parameter | Specification |
|---|---|
| Wiring method | AC card-type sockets, DC with USB+Type-C+DC copper head options |
| Panel functions | AC voltage display, start switch, emergency stop |
| Temperature control | Room temperature to 60±5℃ in product area |
| Control principle | Low-temperature heating with over-temperature exhaust |
| Power distribution | 380V three-phase five-wire with computer/manual control |
| Power capacity | 19.2KW (30W*512 units) with 30-40% electricity recovery |
| Control mode | Manual/automatic switching with computer monitoring |
| Safety features | Grounding protection, leakage switch, smoke alarm with auto power-off |
4. System Main Functions
- Supports aging of mobile power banks with fast charging protocols (QC2.0/3.0/4.0, PD2.0/3.0, PPS, SCP)
- Customizable power supply aging monitoring software with independent IP rights
- Programmable electronic load modules for output parameter monitoring
- Free software upgrades with powerful scalability
- Programmable aging parameters, timing settings, and ON/OFF test functions
- Automatic power cutoff when aging completes for unattended operation
- Computerized quality display with multi-vehicle centralized management
- Data storage and traceability with barcode scanning and MES system support
- Photoelectric isolation for RS232 to RS485 conversion enhances reliability
- Single computer can monitor up to 18 devices simultaneously
- Built-in help documentation for operational support
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen CPET Electronics Co., Ltd.
Location
Building 1, No. 33, Patang Road, Loucun Community, Guangming District, Shenzhen, China XinHu Street,Guangming District, Shenzhen, China
Contact Person
Umiya