3500W Dental Lab Furnace 220V 110mm Zirconia Sintering Dental Ceramic Furnace
SK Dental Zirconia Sintering Furnance Fast and Slow Sintering
Product Introduction
The SK-K45 PLUS dental sintering furnace employs four silicon molybdenum rod heating elements paired with a microprocessor-controlled temperature system, designed specifically for high-efficiency zirconia processing. This configuration achieves maximum furnace temperatures of 1550°C while maintaining thermal uniformity within ±5°C. The system reduces crystallization cycles to 1 hour through optimized heat transfer efficiency, operating at 3,500W power with standard 220V input. Its Φ110×100mm chamber accommodates industrial-scale production runs.
Applications
• High-volume crown/bridge production: Processes 50-60 units per batch
• Implant component sintering: Compatible with pre-milled titanium abutments
• Multi-material protocols: Supports zirconia, glass ceramics, and PMMA
• Technical restoration workflows: Fast/Slow sintering modes for varied material requirements
Technical Advantages
-
Batch Efficiency: Processes full densification cycles in 60 minutes
-
Energy Management: 3,500W balanced power consumption
-
Spatial Optimization: 340×490×757mm (L×W×H) footprint
-
Process Flexibility: Dual-mode sintering protocols
Parameter-Verified Features
Technical Features
| Parameter | Specification |
|---|---|
| Batch Capacity | 50-60 restorations |
| Heating System | 4 Si-Mo rods |
| Cycle Time | 1 hour |
| Power Input | 3,500W / 220V |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.