PVDF MBR Membrane with 23m2 Surface Area for Intermittent Permeate and Continuing Aeration in Waste Water Treatment
Price:
Negotiable
MOQ:
5
Delivery Time:
Negotiable
Brand:
SINOMEMB
Product Description
UF System Safe and Stable Operation Guide for MBR Membrane Element Operation SNU-HO-2-C1030
Product Description
MBR MEMBRANE PVDF-8/PVDF-10/PVDF-15/PVDF-20
MBR Membrane membrane series: Designed for high pressure, high hydrophilia and high flux conditions with improved pollution resistance and extended lifespan.
MBR Membrane membrane series: Designed for high pressure, high hydrophilia and high flux conditions with improved pollution resistance and extended lifespan.
Product Working Principle
List of a full MBR plant
MBR Process Flow Chart
Advantages of MBR System
MBR systems offer significant advantages over conventional biological systems including superior effluent quality, reduced space requirements, and simplified automation. Key benefits include:
Specification
Operation Conditions
| Temperature | 1-45℃ |
| pH | 2-13 |
| Designed Permeate Flux | 10-25LMH, 25℃ |
| NACIO Cleaning Concentration | 5000ppm |
| Back Wash Flux | 30-50LMH, 25℃ |
| Aeration Air | 60-120Nm3/(h*m2) |
| Sludge Concentration | 5000-10000ppm |
| Membrane Operation | Vacuum Sucion |
| Working Method | Working 8min, stop 2min |
| Transmembrane Pressure | ≤60Kpa |
| Max Transmembrane Pressure | ≤80Kpa |
| System Operation | Intermittent Permeate, Continuing Aeration |
| Clean Chemical | Citric Acid/NACIO |
| Cleaning Frequency | 6-12 month |
| Permeate Turbidity | ≤1 NTU |
| Outlet TSS | ≤2 mg/l |
Note: The actual permeate and back wash flux depends on the whole system's operation and maintenance. The output water parameter may vary slightly according to feed water conditions.
MBR Module
MBR Module Specifications
| Model | MBR-50TPD | MBR-100TPD | MBR-150TPD |
|---|---|---|---|
| Capacity | 50-75m3/D | 100-150m3/D | 150-200m3/D |
| Element Quantity | 22 elements (10m2) | 30 elements (15m2) | 40 elements (15m2) |
| Membrane Area | 220m2 | 450m2 | 600m2 |
| Outlet Pipe | DN32 | DN40 | DN50 |
| Inlet Air Pipe | DN40 | DN50 | DN80 |
| Module Size L*W*H (mm) | 1800*760*1500 | 2400*760*400 | 3000*760*1900 |
| Approx. Weight | 200KGS | 400KGS | 550KGS |
| Frame Structure Material | SS Pipe, PVC | ||
| Aeration (air-water ratio) | ＞15:1 | ||
1. PVDF-10 or PVDF-15 membrane assemblies are taken as examples in the design table.
2. The size of the membrane module in the table is recommended data, which can be adjusted according to site conditions.
3. The water production values are recommendations for common sewage treatment conditions. Users should adjust according to actual conditions (COD, MLSS, Aeration rate, etc.).
2. The size of the membrane module in the table is recommended data, which can be adjusted according to site conditions.
3. The water production values are recommendations for common sewage treatment conditions. Users should adjust according to actual conditions (COD, MLSS, Aeration rate, etc.).
UF Specifications and Models
| Model | Membrane Material | Operation Mode | Membrane Element Size (mm) | Effective Membrane Area (m²) | Nominal Filter Pore Size (μm) |
|---|---|---|---|---|---|
| SNU-HI-1-C1030 | PES | inside-out | Φ250×965 | 23 | 0.01 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Sinomemb Environment Technology (beijing) Co.,
Location
1305, Block B, Zhongtiejian Plaza, Beijing, China
Contact Person
Gary Gao