Why choose Double-sided Blue Oil PCB?

Blue oil immersion gold PCB is a type of printed circuit board with a blue solder mask and immersion gold surface finish. The blue oil provides clear visual contrast, making it easier to inspect and debug the board. Immersion gold finish offers excellent electrical conductivity, corrosion resistance, and solderability, ensuring reliable connections and long-term performance. This combination is widely used in high-precision electronic devices, communication equipment, and industrial control systems due to its durability and aesthetic appearance.

Personalized Customization Services:

Please send us your:
1. Gerber files (RS-274X)
2. BOM (if PCBA needed)
3. Impedance requirements & stack-up (if available)
4.Test requirements (TDR, network analyzer, etc.)

We’ll reply within 24 hours with a free quote, DFM report, and material recommendation.

Challenges in Double-Sided Rigid PCB with Blue Solder Mask:

1. Interlayer Connection (Plating)
• Plated Through-Hole (PTH) Reliability: Achieving a uniform and robust copper plating inside the small drilled holes (vias) is essential to electrically connect the top and bottom circuit layers. Poor plating quality leads to open circuits or intermittent failures.
• Registration Accuracy: Precise alignment is required between the circuit patterns on the top and bottom sides so that the drilled PTHs land perfectly on the copper pads.
2. Double-Sided Assembly Complexity
• Dual Reflow Soldering: Components on both sides necessitate the board passing through the reflow oven twice. The process must be carefully controlled to prevent components already soldered on the first side from shifting or falling off during the second pass.
• Thermal Management: Components on both sides make heat dissipation more difficult compared to a single-sided board.
3. Solder Mask Application (Blue Color Specific)
• Visual Inspection Difficulty: While not a manufacturing defect, blue solder mask can sometimes make Automated Optical Inspection (AOI) and manual visual inspection more challenging. Compared to the standard green, blue can sometimes have lower contrast against the copper traces and silkscreen, making it slightly harder to spot subtle defects like solder bridges or trace damage.
• Solder Mask Registration: Ensuring the solder mask precisely covers all copper traces while leaving the designated component pads open requires tight tolerance control to prevent "solder mask slivers" (small gaps) or "mask encroaching" (mask covering the pad).

          Factory showcase

            PCB Quality Testing