Nema17 Stepper Motor 0.9° 42mm Hybrid Position Control Stepper Motor For 3d Printer
Position Control Stepper Motor Products NEMA17 0.9° 42mm Hybrid Position Control Stepper Motor Max.Axial Force 10N For 3d Printer,Textile Equipment
| Step Angle | 0.9° | Temperature Rise | 80℃max |
|---|---|---|---|
| Ambient Temperature | -20℃~+50℃ | Insulation Resistance | 100Ω Min.,500VDC |
| Dielectric Strength | 500VAC For 1minute | Shaft Radial Play | 0.02Max.(450g-load) |
| Shaft Axial Play | 0.08Max.(450g-load) | Max.radial Force | 28N(20mm From The Flange) |
| Max.axial Force | 10N | Type | Hybrid |
| Phase | 2 | Current / Phase | 1.4A |
| Holding Torque | 2.2kgf.cm | Step Angle(degrees) | 0.9Degree |
| Highlight |
nema 11 stepper motor,2 phase hybrid stepper motor |
||
NEMA17 0.9° 42mm hybrid stepper motor 2 phase motor for 3d printer
Stepper motors are motion systems allowing to have a high positioning precision.
With their high power already at low speed, their stall torque and the possibility to divide the steps in micro steps,
stepper motors can provide direct and precise motions in a small volume.
Permanent magnet and hybrid technologies are used to provide a full range of solutions.
The absence of mechanical commutation gives to these motors a long life time which is usually given by the sleeves
according to the load applied on the shaft.
Mechanical Dimension:MM
![NEMA17 0.9° 42mm Hybrid Position Control Stepper Motor Max.axial force 10N For 3d Printer,Textile Equipment 1]()
Typical Applications
- Textile Equipment
- Automatic Control
- Packing Machine
- Engineering Vehicle
- 3D Printer
- New Energy
- Gate Openers
- Vending Machine
- Conveyor System
- Medical Equipment
- Fluid Control
- OA Financial Equipment
Specifications
| Model No. | Step Angle (°) | Motor Length (mm) |
Current |
Resistence /Phase Ω | Industance /Phase mH | Holding Torquue kg.cm | Leads No. | Detent Torque g.cm | Rotor Inertia g.cm² | Weight Kg |
|---|---|---|---|---|---|---|---|---|---|---|
| 42HM34 -1334 |
0.9 | 34 | 1.33 | 2.1 | 4.2 | 2.2 | 4 | 200 | 35 | 0.22 |
| 42HM34 -0316 |
0.9 | 34 | 0.31 | 38.5 | 33 | 1.58 | 6 | 200 | 35 | 0.22 |
| 42HM34 -0956 |
0.9 | 34 | 0.95 | 4.2 | 4 | 1.58 | 6 | 200 | 35 | 0.22 |
| 42HM40 -1684 |
0.9 | 40 | 1.68 | 1.65 | 3.2 | 3.3 | 4 | 220 | 54 | 0.28 |
| 42HM40 -0406 |
0.9 | 40 | 0.4 | 30 | 30 | 2.59 | 6 | 220 | 54 | 0.28 |
| 42HM40 -1206 |
0.9 | 40 | 1.2 | 3.3 | 3.4 | 2.59 | 6 | 220 | 54 | 0.28 |
| 42HM48 -1684 |
0.9 | 48 | 1.68 | 1.65 | 4.1 | 4.4 | 4 | 250 | 68 | 0.38 |
| 42HM48 -1206 |
0.9 | 48 | 1.2 | 3.3 | 4 | 3.17 | 6 | 250 | 68 | 0.38 |
| 42HM48 -0406 |
0.9 | 48 | 0.4 | 30 | 38 | 3.17 | 6 | 250 | 68 | 0.38 |
| 42HS60 -1684 |
0.9 | 60 | 1.68 | 1.65 | 5 | 5.5 | 4 | 270 | 106 | 0.55 |
Competitive Advantage
-
High quality and the best price.
-
Fast deliver,storage company and adequate inventory.
-
Near Shanghai port, the traffice is very convenient.
Torque Curve For Reference
Customization service
Motor’s design can be adjusted based on customer’s requirement including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter motor
Coil resistance/ rated voltage: coil resistance is adjustable, and with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to be longer/short, with special design such as mounting holes, it’s adjustable.
PCB + cables + connector: PCB’s design, cable length and connector pitch are all adjustable, they can be replaced into FPC if customers require.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.