Silicone Rubber Spraying Coating Ink Cured At High Temperature

Product Description

This ink mainly used for silicone rubber spraying coating ink, cured at high temperature (180~220℃).Characterized by smooth feeling, friction resisting, dust proof , well Covering power and adhesive power. Suit for the spraying coating necessaries of silver oil, colored-oil, Laser etching oil.

Application

Mainly applied to silicone bracelet, silicone cellphone case, silicone keypad and other silicone rubber products.

Application Ratio

Silicone ink: 100g

Mixer(catalyst): 2~3g

Thinner: 300~500g

Processing

1. Pick out appropriate ink at ratio (100/2-3) into a cleaning barrel, mixed with catalyst thoroughly.

2. Diluting for three to five times with thinner (Toluene, White Gas or Dimethyl- benzene).

3. About 5-10min mixing

4. Filtrating with 300 mesh filter screen for twice before spraying.

5. Max 12hours working time for mixed ink.

6. Keeping 22℃ working temperature

All the above physical data only for reference.

Baking method

A.Oven:Baking at 180℃ for 20 minutes.

B.IR strip: Baking at constant temperature 200℃ for 7 minutes

Attention

1. This agent including volatile solvent, please keep ventilating and far away from heat and open flame.

2. Avoid skin contact for a long time and vapor inhalation

3. Washing with soap once skin contact.

Storage

Stored at room temperature for 6 months with any mixing.

Packing

1KG/Bottle.