Soft Touch Coating Oil

Two-component, low-temperature curing coating.
Application: External coating on cured silicone rubber surfaces, followed by high-temperature curing (190–220°C).
Characteristics: Smooth touch, wear-resistant, dustproof, high coverage and adhesion strength.
Typical finished goods: Silicone rubber keypads, adult products, photocopiers, and home appliances like remote controls.

   Product specifications:   

Typical Data

  Processing methods:  

1. Engage the ready silicone rubber in second cure (190℃-200℃, 8-10minutes ), wash clean the surfaces   

2. Add 3% of platinum catalyst into the silicone resin for mixture and dilute with solvent(white gas) six times ,try small quantity first followed by mass input of the solvent when diluting the silicone resin.

3. Please filtrate with 300-400 mesh filter screen for twice before uploading in the spraying gun

4. Leave alone the ready silicone resin for 3-8minutes in the dust-free plant before the spraying process.

Baking method

Baking Condition(190-200℃) 8 – 10 min  

   Attentions:   

• Opened product: mix evenly. When handling ink, add platinum catalyst before dilution.
• Spraying conditions: dust‑free plant preferred; temperature 20–30°C, humidity 55–75%.
• Silicone rubber: apply second cure at >150°C for 10–30 min; failure to do so causes poor paint cure on surfaces.
• Curing stage: increase temperature gradually. Direct baking after spraying reduces shininess.
• Mixed silicone resin: consume within 12 hours. Sealed low‑temperature storage prolongs usable life.

    Applications:   

   About Us