Carbon-Based Silicone Conductive Spray Ink for Keypad & Touch Contacts
Price:
$10-$100
MOQ:
1KG
Delivery Time:
5-7 work days
Brand:
KangLiBang
Product Description
Silicone Rubber Spraying Conductive Coating Ink
Silicone Rubber Spraying Conductive Coating Ink
Product Description
This product is manufactured via high-temperature vulcanization. As a one-part ink, it is designed for application onto silicone product surfaces where electrical conductivity is needed. It works well with silk screening, pad printing, and spot printing.
Application
Mainly applied to silicone products that requires electrical conductivity.
Processing
Remove any contaminants (impurities, oil, particles, etc.) from the silicone surface.
2. After taking the ink from the refrigerator, allow it to warm to room temperature before use. If the viscosity is too high, add odorless kerosene to bring it to a consistency suitable for screen, pad, or dot printing.
3. Let the ink rest for 10–30 minutes in a dust-free area. Once the solvent has fully evaporated, curing occurs.
4. Vulcanize by baking at 180–200℃ for 10–20 minutes.
5. Use aviation kerosene as thinner. For dot printing, mix ink and thinner at 1:2; for screen printing, use 1:0.2.
6. Typical resistance is around 100 Ω.
These values are for reference only.
2. After taking the ink from the refrigerator, allow it to warm to room temperature before use. If the viscosity is too high, add odorless kerosene to bring it to a consistency suitable for screen, pad, or dot printing.
3. Let the ink rest for 10–30 minutes in a dust-free area. Once the solvent has fully evaporated, curing occurs.
4. Vulcanize by baking at 180–200℃ for 10–20 minutes.
5. Use aviation kerosene as thinner. For dot printing, mix ink and thinner at 1:2; for screen printing, use 1:0.2.
6. Typical resistance is around 100 Ω.
These values are for reference only.
Attention
1. The product should be sealed and stored at 0-10°C, and the storage period is three
months. When the product has passed the storage period, it can be further used after
the technical test.
2. The product should be stirred evenly and completely.
3. Printing must be done in a suitable environment. It is recommended to keep the
working area free of dust, keep the temperature below 25 ° C and control the
humidity to 60-75%. Too low humidity will easily cause static electricity in the ink,
which in turn may result in a poor printed image.
4. Unused ink should be sealed and refrigerated.
Packing
1KG/Bottle.
Application range:
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shenzhen KangLiBang Technology Co., Ltd
Location
H Building, 3rd Xinwei Industrial Park, Dalang Street, Longhua New District, Shenzhen City, Guangdong Province, China.
Contact Person
Gary