Solvent Based Silicone PU Top Coating Ink Strong Adhesion After Plasma Treatment Silicone PU Ink

Silicone Rubber Polyurethane (PU) Coating Ink 

Product Description

Comparison/Highlight (What it does better)
Unlike conventional inks, this silicone PU grade adheres flawlessly to difficult elastomers and plastics. It remains elastic yet tough, shrugs off abrasion and chemicals, and stands up to rain and sun. Quick to cure under heat or UV, it produces bright, permanent prints with a noticeably smooth texture.

Application

Mainly applied to silicone cellphone case, silicone keypad and other silicone rubber products.

Application Ratio

Silicone ink: 100g

Mixer(catalyst): 2~3g

Thinner: 300~500g

Processing

• Mix: Load your cleaning barrel with ink and 2-3% catalyst (100/2-3 ratio). Make sure they are thoroughly combined.
• Reduce: Introduce thinner (White Gas or Dimethyl-benzene) at a 3-to-5 times dilution ratio.
• Blend: Homogenize the contents for a solid 5 to 10 minutes.
• Strain: Double-filter the solution using a 300-mesh screen prior to spray application.
• Clock: Do not exceed the 12-hour maximum usable life of the mixed product.
• Climate: Keep your workspace temperature locked in at 22°C.

All the above physical data only for reference.

Baking method

A.Oven:Baking at 180℃ for 20 minutes.

B.IR strip: Baking at constant temperature 200℃ for 7 minutes

Attention

1. This agent including volatile solvent, please keep ventilating and far away from heat and open flame.

2. Avoid skin contact for a long time and vapor inhalation

3. Washing with soap once skin contact.

Storage

Stored at room temperature for 6 months with any mixing.

Packing

1KG/Bottle.