CET-2001Q Epoxy Resin Grout for Quartz Sensors - 20kg Set with ≥40 MPa Compressive Strength
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
1 week
Brand:
Enviko
Product Description
CET-2001Q is a specialized 3-component modified epoxy grout system designed specifically for the installation and anchoring of dynamic weighing quartz sensors (WIM sensors). This advanced formulation fills the gap between concrete base grooves and sensors, providing stable support to ensure long-term operational stability and extended service life.
Product Composition and Specifications
Components:
- Component A: Modified epoxy resin (2.4 kg/barrel)
- Component B: Curing agent (0.9 kg/barrel)
- Component C: Filler (16.7 kg/bag)
Mixing Ratio:
A:B:C = 1:0.33:(5-7) by weight
Pre-packaged total weight: 20 kg/set
Technical Performance Parameters
| Parameter | Specification |
|---|---|
| Curing Time (23℃) | Working time: 20-30 minutes; Initial setting: 6-8 hours; Fully cured: 7 days |
| Compressive Strength | ≥40 MPa (28 days, 23℃) |
| Flexural Strength | ≥16 MPa (28 days, 23℃) |
| Bond Strength | ≥4.5 MPa (with C45 concrete, 28 days) |
| Applicable Temperature | 0℃~35℃ (not recommended above 40℃) |
Installation Requirements
Base Groove Dimensions:
- Width ≥ Sensor width + 10mm
- Depth ≥ Sensor height + 15mm
Surface Preparation:
- Remove all dust and debris using compressed air
- Ensure groove surface is completely dry and oil-free
- Eliminate all standing water or moisture
Mixing and Application Procedure
Mixing Steps:
- Mix components A and B with electric drill mixer for 1-2 minutes until uniform
- Add component C and continue mixing for 3 minutes until no granules remain
- Working Time: Mixed grout must be poured within 15 minutes
Installation Guidelines:
- Pour grout into base groove, filling slightly above sensor level
- Ensure sensor is centered with grout evenly extruded on all sides
- For gap repairs, grout height should be slightly above base surface
Temperature-Specific Application Guidelines
| Ambient Temperature | Recommended Usage (kg/batch) |
|---|---|
| <10℃ | 3.0~3.3 |
| 10℃~15℃ | 2.8~3.0 |
| 15℃~25℃ | 2.4~2.8 |
| 25℃~35℃ | 1.3~2.3 |
Important Notes:
- At low temperatures (<10℃), store materials in 23℃ environment for 24 hours before use
- At high temperatures (>30℃), pour in small batches quickly
Curing and Service Readiness
Curing Schedule:
- Surface drying occurs after 24 hours, allowing sanding
- Full curing requires 7 days
- Traffic opening time: 24 hours after curing (when surface temperature ≥20℃)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Chengdu Enviko Technology Co.,Ltd
Location
Room 1001, Unit 2, Building 2, No. 158 Tianfu 4th Street
Contact Person
Max Chung