316L High Pressure Conductivity Sensor 0.01-20μS/cm Range with 2.0MPa Rating for Water Quality Monitoring
Price:
USD50-500
MOQ:
1 Unit
Delivery Time:
5-8 working days
Brand:
JUGE
Product Description
Product Overview
High-pressure 316L conductivity sensor designed for precise measurement of low conductivity solutions with EC range of 0.01-20μS/cm and pressure rating up to 2.0MPa.
Technical Specifications
| Parameter | Specification |
|---|---|
| Conductivity Range | 0.01-20μS/cm |
| Resistivity Range | 0.01-18.2MΩ·cm |
| Electrode Mode | 2-pole |
| Electrode Constant | K≈0.01 |
| Wetted Material | 316L Stainless Steel |
| Temperature Range | 0-80℃ |
| Pressure Rating | 0-2.0MPa |
| Temperature Sensor Options | NTC10K/NTC2.2K/PT100/PT1000 |
| Installation Interface | Upper NPT3/4, Lower NPT1/2 |
| Electrode Cable | Standard 10m |
Measurement Principle
Conductivity measurement operates on the principle that dissolved salts in water exist as ions that move under an applied electric field. The anions migrate toward the anode, enabling electrical conduction through the solution.
Conductivity represents the reciprocal of resistivity and serves as a critical indicator for assessing water quality by revealing the concentration of electrolytes present. The measurement is temperature-dependent and typically standardized to 25°C for accurate comparison.
Installation Methods
Before installation, remove the electrode protective cap and use appropriate mounting brackets or accessories.
- Sidewall Installation: Ensure interface tilt angle exceeds 15 degrees
- Top Flange Installation: Note flange dimensions and electrode insertion depth
- Pipe Installation: Consider pipe diameter, flow velocity, and pressure requirements
- Flow-Through Installation: Monitor flow velocity and pressure conditions
- Submersion Installation: Adjust bracket length according to application needs
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Nanjing Juge Environmental Technology Co., Ltd.
Location
Building 17, No. 99 Guangli Road, Moling Subdistrict, Jiangning District, Nanjing, Jiangsu
Contact Person
Leon Chen