Custom Analog ISE Chloride Ion Sensor Cl- Sensor with 0-0.3MPa Pressure Resistance and 5m Cable
Price:
USD300-600
MOQ:
1 Unit
Delivery Time:
5-8 working days
Brand:
JUGE
Product Description
Analog ISE Chloride Ion Sensor Technical Specifications
| Parameter | Specification |
|---|---|
| Concentration Range | 1 M to 5×10⁻⁵ M (35,500 ppm to 1.8 ppm) |
| pH Range | 2-12 pH |
| Temperature Range | 0-60°C |
| Pressure Resistance | 0-0.3 MPa |
| Housing Material | PP (Polypropylene) |
| Membrane Resistance | <1 MΩ |
| Connection Thread | PG13.5 |
| Cable Length | 5 m standard (customizable) |
| Cable Connector | Pin, BNC, or custom options |
Product Overview
The ion-selective electrode (ISE) is a membrane electrode featuring a sensitive membrane that generates membrane potential through ion exchange or diffusion processes. This chloride ion sensor consists of an ion-selective membrane, internal reference electrode (Ag/AgCl), and internal reference solution. It measures electrical potential of chloride ions in solution relative to a reference electrode, enabling precise quantitative analysis through potential difference measurement.
Key Features & Benefits
- Reagent-free operation eliminates chemical consumption and environmental pollution
- Redox potential measurement ensures rapid response times and signal stability
- Polypropylene construction provides chemical resistance and durability
- High-quality sensor cables enhance measurement accuracy and signal integrity
- Cost-effective solution for continuous chloride ion monitoring
Operation & Calibration
Pre-Measurement Preparation
- Remove protective cap from electrode tip (avoid touching sensitive area)
- Shake electrode downward to eliminate internal air bubbles
- Activate new or unused electrodes in 1 ppm standard solution for 24 hours
- Rinse with deionized water and immerse in stirred deionized water for 5 minutes before testing
Calibration Procedure
- Connect electrode to meter and set to mV mode
- Use 100 mL deionized water in 150 mL beaker with stirring
- Add 1 mL of 1000 ppm standard solution, record stable reading (E₁)
- Add 10 mL of same standard solution, record stable reading (E₂)
- Calculate slope at 25°C as E₂ - E₁ for performance validation
Maintenance & Storage
Troubleshooting
If slope deviation occurs, prepare fresh diluted standard solution and soak electrode for 10 minutes before recalibration. Contact technical support if issues persist.
Storage Guidelines
- Short-term: Store in deionized water or low-concentration standard solution (1 ppm)
- Long-term: Rinse, dry thoroughly, and store in original packaging
- Reactivation required after long-term storage: soak in 1 mg/L standard solution for 2+ hours
Customization Available: Cable length (5m standard), connector types (Pin, BNC), and specific application requirements.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Nanjing Juge Environmental Technology Co., Ltd.
Location
Building 17, No. 99 Guangli Road, Moling Subdistrict, Jiangning District, Nanjing, Jiangsu
Contact Person
Leon Chen