JIS L1096 FZ/T 01076 Planar Pressurized Shrinkage Rate Testing Machine Flat Textile Shrinkage Tester
JIS L1096 FZ/T 01076 Planar Pressurized Shrinkage Rate Testing Machine Flat Textile Shrinkage Tester
Introduction
This machine is a fully automatic flat pressurized shrinkage rate testing machine designed for measuring the pressurized shrinkage rate of textiles. It was developed to meet all the test methods specified in the Japanese Industrial Standard (JIS L 1096) "Size Changes of Textiles - Pressurized Treatment (Method H)".
The heating, steam injection, steam suction, and final suction have different test durations. These can be set arbitrarily by four timers. After the sample is installed, all the operation processes will be carried out automatically.
Compliant with standards
JIS L 1096;FZ/T 01076-2010
Technical Specification
|
Pressurization method |
Air compressor |
|
Pressurization range |
10 - 40 KPa/cm² |
|
Ironing mold surface specification |
W800 × D400 mm |
|
Steam jetting method |
Up and down mold jetting type |
|
Adjustment of blown steam |
Manual regulating valve (common steam pressure: 490 KPa) |
|
Upper mold heater |
3KW |
|
Maximum temperature |
180℃ (equipped with temperature regulator) |
|
Time counter for tests |
Steam jetting timer, heat treatment timer, timer for attracting after the upper mold rises and attracting |
|
Timer setting range |
0 - 30 seconds |
|
Overall dimensions (approximate) |
W1200 × D1200 × H1500 mm |
|
Power supply |
3-phase 380V 50Hz |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.