Hollow Glass Steady State U-value Tester Insulation Materials Steady-State Thermal Resistance Properties Test Machine
Hollow Glass Steady State U-value Tester Insulation Materials Steady-State Thermal Resistance Properties Test Machine
Product Description
The hollow glass steady-state U-value tester is used to measure the steady-state U-value of hollow glass. According to the requirements of the standard GB/T22476 "Calculation and Measurement of Steady-State U-Value (Heat Transfer Coefficient) of Hollow Glass", the steady-state U-value of hollow glass is measured by the protective heat plate method. The hollow glass steady-state U-value tester is applied to various manufacturers of hollow glass materials, relevant quality inspection departments and units, universities and research institutes, and other scientific research units and institutions.
According to standards
GB/T10294-2008 "Determination of Steady-State Thermal Resistance and Related Properties of Insulation Materials"
GB/T22476-2008 "Calculation and Measurement of Steady-State U-Value (Heat Transfer System) of Insulating Glass"
Hollow Glass Steady State U-value Tester Insulation Materials Steady-State Thermal Resistance Properties Test Machine
Technical Specification
|
Sample Size |
800mm × 800mm × H (10 - 120)mm |
|
Heat Transfer Coefficient Measurement Range |
(0.25 - 4.5) W/(m²·K) |
|
Heat Transfer Coefficient Measurement Accuracy |
±3% |
|
Heat Transfer Coefficient Measurement Repeatability |
±1% |
|
Cold Plate Temperature Measurement Range |
(-5 - 50)℃ |
|
Hot Plate Temperature Measurement Range |
(10 - 80)℃ |
|
Temperature Measurement Values of Heat Transfer Coefficient Tester |
1. Cold plate set temperature: 2.5℃2. Hot plate set temperature: 17.5℃ |
|
Temperature Resolution |
0.01℃ |
|
Laboratory Temperature |
(23 ± 2)℃ |
|
Laboratory Humidity |
(40 - 60)%RH |
|
Power Supply Voltage & Power |
220V, 5kW |
|
Number of Test Pieces |
2 identical samples |
|
Laboratory Environment Requirements |
1. Power supply voltage: 220V, three-phase five-wire system 2. Laboratory temperature: (23 ± 2)℃ 3. Laboratory humidity: (40 - 60)%RH 4. Main area occupied by experimental equipment: 1580mm × 1200mm × 2300mm 5. Additional space required for placing computer desk |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.