ASTM G26 ISO 105 Xenon Test Chamber ASTM G155 ASTM D2565 c Aging Box Xenon Lamp Aging test Chamber Environment Test Cham
ASTM G26 ISO 105 Xenon Test Chamber ASTM G155 ASTM D2565 c Aging Box Xenon Lamp Aging test Chamber Environment Test Cham
ASTM G26 ASTM G155 ASTM D2565 ISO 105 Xenon Test Chamber Uv aging box xenon lamp aging test chamber
1.Profile.
Xenon lamp aging test chamber simulates the full spectrum lamp with Xenon arc lamp to reappear the destructive wave. It serves for the environmental simulation and accelerated test for research and development, product development and quality control. Besides, the chamber also applies to the choice of new material, weathering test after composition of material and improvement for the current material. It simulate different environment, and show the material changes under the explosion of sunlight.
2.The chamber meets the standard: GB/T16585-1996 , GB14522-93 , GB/T16422.3-97,ASTM G-155 ASTM D2565 and ISO 105-B04:1994 4.3 Sun conditions so on.
The Chamber is to determine the color fastness, aging resistance of textiles, plastics, coatings, rubber products or other materials by objecting to the simulated conditions of nature weather (sun, rain, temperature and humidity, etc.).
ASTM G26 ASTM G155 ASTM D2565 ISO 105 Xenon Test Chamber Uv aging box xenon lamp aging test chamber
|
3.Main technical parameters |
|
|
Interior dimension
|
600×600×800mm(W*D*H) |
|
Carton size |
About 1200×1110×1950mm(W*D*H) based on the actual size |
|
Radiation intensity of xenon lamp |
Uv 340nm band,0.35~0.7W/m2 ; |
|
Lamp Number
|
1 Piece |
|
Lamp power
|
2.5KW |
|
Lamps life
|
1200 hours or so |
|
Filter type |
Sun filter |
|
Temperature range |
RT+10℃~70℃ |
|
Blackboard temperature range |
40℃ ~ 100℃ adjustable (light period); 25 ~ 85℃ (Dark cycle) |
|
Thermometer selection |
Blackboard thermometer BPT |
|
Irradiance meter |
Intelligent fully automatic irradiation intensity compensation |
|
Temp Accuracy
|
±0.1℃ |
|
Temperature fluctuation |
±0.5℃ |
|
Temperature departure |
±3℃ |
|
Humidity range |
30% ~ 98%RH (in the dark); 20% ~ 60%RH (when the light is on) |
|
Humid. accuracy
|
±1%RH |
|
Humidity fluctuation |
±3%RH |
|
Variation
|
Within ±5%RH |
|
Light cycle time |
1S~999H59M59Scontinuously adjustable |
|
Rainfall time |
1S~9999min Continuous rainfall is adjustable |
|
Rainfall cycle
|
1~240min The interval (break) rainfall is adjustable |
|
Spray cycle |
18min/102min or 12min/48min (Water spraying time/no water spraying time) |
|
Rain pressure |
0.12~0.15Mpa |
|
Nozzle aperture |
∅0.8mm |
|
Diameter Of Rctary Tabel
|
∅800mm |
|
Rotary speed |
1~3R/min
|
|
Standard sample plate clip |
A set |
|
GB/T8430-1998 ISO105-B04:1994 Sample exposure content |
1) The temperature of the test chamber does not exceed 40℃ during the drying cycle; The blackboard temperature measured under the same exposure as the sample should not exceed the maximum temperature of 20℃ in the drying period test chamber; 2) Spray duration: 1min;
|
|
Water quality requirement |
Use pure or deionized water
|
|
Rubber sealing strips of doors and windows for vehicles
|
Silicone rubber pressing seal device
|
|
Sample shelf material |
SUS304 stainless steel |
|
Interior material
|
SUS304 stainless steel |
|
Exterior material
|
Cold tie board paint |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.