500mW Data Link Mesh Network Radio Ethernet Radio Data Transmitter For Communication
Price:
US$399~US$488
MOQ:
1 set (2pcs)
Delivery Time:
7~14 working days
Brand:
Hincn
Product Description
30km Data Link Mesh Radio Ethernet Transceiver Radio For Communication
Key Features
- Supports up to 735kbps wireless link rate
- Supports Point-to-Point, Point-to-Multipoint, Multipoint-to-Point and Mesh topologies
- Supports maximum 1024 nodes mesh network
- High sensitivity: -114 dBm when data rate is 125kHz
- Supports frequency hopping (FHSS)
- Air-to-ground LOS (light of sight) distance: ≥30km
- Two serial ports (TTL/RS232/RS422 optional)
Overview of HNC2 -500mW Data Link Mesh Radio
This high-performance mesh radio enables centerless long-distance communication between large-scale nodes, allowing all nodes to communicate independently without interference.
Designed for applications, it supports large-scale dense node access to wireless transmission, dynamic networking, and flexible reorganization.
Features full-multiplexing communication, allowing nodes to send and receive data from all other nodes simultaneously without interference.
Applications
Ideal for swarming drones, Internet of Things (IoT), data chains, remote control, data collection, artificial intelligence, and equipment applications.
Available Models
| Model | RF Power | Network Scale | Frequency Bands |
|---|---|---|---|
| HNC2-H400-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 430~450MHz |
| HNC2-H800-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 820~854MHz |
| HNC2-H900-500mW | 500mW | Max. 1024 nodes, up to 16 hops | 900~940MHz |
| HNC2-F400-500mW | 500mW | Max. 256 nodes, up to 3 hops | 430~450MHz |
| HNC2-F800-500mW | 500mW | Max. 256 nodes, up to 3 hops | 820~854MHz |
| HNC2-F900-500mW | 500mW | Max. 256 nodes, up to 3 hops | 900~940MHz |
Technical Specifications
| Specification | Value |
|---|---|
| Model Number | HNC2-500mW |
| Frequency | Different models support different frequency bands (see models table) |
| Bandwidths | 1MHz/500kHz/250kHz/125kHz selectable |
| Number of nodes and hops | Maximum 1024 nodes up to 16 hops or 256 nodes up to 3 hops (see models table) |
| Frequency hopping speed | 1MHz: Over 1800 times per second 500kHz: Over 900 times per second 250kHz: Over 450 times per second 125kHz: Over 225 times per second |
| Effective data rate | 1MHz: Up to 735kbps 500kHz: Up to 370kbps 250kHz: Up to 185kbps 125kHz: Up to 92kbps |
| Full-multiplexing communication | Support |
| Air-to-ground LOS (light of sight) distance | ≥30km |
| Centerless self-organized network | Support |
| Network construction time | Within 1 second |
| Wireless transmission delay | Minimum 2ms |
| Dynamic topology | Support |
| RF power | 500mW (27dBm) |
| Sensitivity | 125kHz: -114dBm 250kHz: -111dBm 500kHz: -108dBm 1MHz: -105dBm |
| Frequency stability | ≤1ppm |
| Modulation | QPSK modulation LDPC coding |
| Encryption | 128-bit encryption |
| Low power consumption | Less than 1W when receiving, less than 4W when transmitting, average working power consumption less than 2.5W |
| Operating voltage | 24V as default, supports a wide voltage input of 7-36V |
| Operating temperature | -40～+85°C |
| Dimensions | 53*53*17.3mm |
| Weight | 65g |
Input/Output
| I/O | Description |
|---|---|
| Power-in | Power-input, XT30PW-M connector |
| Dip-switch | Dial switch, switch between configuration mode and transparent transmission mode |
| Uart 1 | Configure/transparent data serial port 1, TTL 3.3V level as default, optional RS232 or RS422 serial port |
| Uart 2 | Transparent data serial port 2, TTL 3.3V level as default, optional RS232 or RS422 serial port |
| ANT | SMA female, antenna port, required antenna impedance is 50Ω |
| PWR-LED | Red, power input status indicator LED, continuous light on when power input is normal |
| RX-LED | Green, data receiving indicator LED, briefly lit during power on self-test, light on when receiving data |
| TX-LED | Green, data transmitting indicator LED, briefly lit during power on self-test, light on when transmitting data |
| CA-LED | Blue, interference indicator LED, briefly lit during power on self-test, frequently lit in configuration mode. In transparent transmission mode: When the light is on, there is interference with the air interface, and the brighter the light, the stronger the interference. |
Image
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hincn Limited
Location
14/F, The Belgian Bank Building, No. 721-725 Nathan Road, Mongkok, Kowloon, Hongkong,China
Contact Person
Angela