TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
Price:
US$268.00~US$298.00
MOQ:
1 pc
Delivery Time:
7~14 working days
Brand:
Hincn
Product Description
TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
TDD COFDM 2W 5W 10W 1.4GHz 1.5GHz Band Bidirectional RF Power Amplifier Module
Brief Introduction
Time-division frequency-sharing networking with low-noise amplifier, 2W, 5W, 10W digital power amplifier modules. Size is 40*40*12mm, suitable for connecting with our TDD wireless video data transmitter to increase power and achieve long-distance transmission.
Specifications
- Model number: HCP2-4040
- Product name: TDD COFDM Bidirectional RF Power Amplifier Module With 2W 5W 10W 1.4GHz 1.5GHz Band
- High linearity
- Frequency range: 1420~1530MHz or other frequencies
- Gain: ≥17dB±1dB@28V or 12dB@12V
- Shoulder ratio: ≥40dB@2.0W@28V, ≥31dB@5W@28V, ≥20dB@10W@28V (DVB-T 2/8K mode modulation signal, Deviation from the center frequency 4.3MHz)
- In-band fluctuations: ≤ ±1dB (typical value±0.5dB)
- Input/output interface: SMA or MCX, IPEX for bare board
- Maximum input power: 30dBm
- Third order intermodulation: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V
- ACPR: ≤40dB@Pout=33dBm@28V ≤30dB@37dBm@28V (Test in the ±4.3 MHz range outside the frequency band)
- Harmonic suppression: ≥-30dBc@ Pout=33~40dBm@28V
- Input VSWR: ≤2 (load 50Ω)/ Output standing wave ratio: ≤1.5 (load 50Ω)
- Relative group delay: ≤20ns
- RF switch switching time: turn on time≤1us / switch off time ≤0.2us
- Power amplifier transmit-receive isolation degree: ≥40dB
- Receive gain: 2~3dB (or 10-13dB,with internal low-noise amplifier), or 10dB@10~50MHz narrowband bandwidth with built-in acoustic wave filter
- Control level: TTL level, 1.8～5V (high capability, or customized version: Automatic detection of transmission input exceeding 15 dBm enables automatic transmission and reception modes. EN 1: Power amplifier is in transmitting mode,but receiving is off. EN 0: Receiving status, but transmitting is off (power amplifier static current is less than 0.15A)
- Working temperature: -25~+85℃
- Supply voltage: 12~28V
- Working current: 28V/0.65A@2W, 28V/0.85A@5W, 28V/1.3A@10W
- Volume: size with housing 40*40*12mm/ bare board size: 32.6*32.6*5mm
High linearity, extremely high reliability, no damage to the power amplifier in case of open circuit, short circuit or system self-excitation.
Power amplifier output 2W spectrogram
Power amplifier output 2W constellation diagrams and error rates
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hincn Limited
Location
14/F, The Belgian Bank Building, No. 721-725 Nathan Road, Mongkok, Kowloon, Hongkong,China
Contact Person
Angela