Shenzhen Wanshujie Photoelectric Technology Co., Ltd.
                                                                                                           
Verified Supplier
7 Years
Since 2019
Menu

1.45-inch round screen SPI/MIPI/QSPI interface 412*412 resolution TFT LCD display module

Price Negotiable
Price: $10/pieces 1-99 pieces
MOQ: 100pcs
Delivery Time: 5-6WEEKS
Brand: WANSHUJIE
Product Description
1 General Specifications
No. Item Specification Remark
1 LCD Size 1.45 inch (Diagonal)  
2 Driver Element a-Si TFT active matrix  
3 Resolution 412 (RGB) ×412  
4 Display Mode Normally Black, Transmissive  
5 Pixel Pitch 0.0299 (H) × 0.0897(V)  
6 Display Colors 262k  
7 Surface Treatment --  
8 Color Arrangement RGB-Stripe  
9 Interface 4-line SPI/MI PI/QSPI  
10 Viewing Direction ALL  
11 Gray Scale Inversion Direction -- Note 1
12 Outline Dimension (mm) 39.36(W) ×41.53 (H) ×1.66(T)  
13 Active Area (mm) 36.96 (W) ×36.96 (H)  
14 Touch Screen Without Cover LENS  
15 Display Driver IC SPD2010  
16 Touch Driver IC Incell driver IC SPD2010  
Note 1: Viewing direction for best image quality is different from TFT definition. There is a 180°shift.

Note 2: RoHS compliant.
2 Pin Assignment
2.1 LCD Pin assignment
Match connector: FH26-31S-0.3SHW (Hirose) or equivalent.
PIN Symbol I/O Description Remark  
1 GND P Ground    
2 D0P I/O MI PI DSI-D0+ data signals    
3 D0N I/O MI PI DSI-D0- data signals    
4 GND P Ground    
5 DCKP I MI PI DSI-CLK+ clock signals    
6 DCKN I MI PI DSI-CLK- clock signals    
7 GND P Ground    
8 QSPI D2 I QSPI data signal    
9 QSPI D1 I QSPI data signal    
10 D/QSPI D0 I D/QSPI data signal    
11 GND P Power Ground    
12 SCL I SPI clock signal.    
13 SDA I/O SPI data signal    
14 RESET I System reset pin,Signal is active low.    
15 GND P Power Ground    
16 TP-RESET I Reset signal for touch circuit.    
17 TP-INT I Interrupt signal for touch circuit.    
18 IM 1 I Interface selection. Note1  
19 IM0 I Interface selection. Note1  
20 GND P Power Ground    
21 PNSWAP I PNSWAP polarity swap of MI PI signal    
22 TEST-I(2) I This pin is used as D/CX (data/ command
selection) in SPI Interface .
   
23 TP-SCL I TP_I2C _SCL(3.3V), 4.7K~10K pull up resistor
needed
   
24 TP-SDA I/O TP_I2C_SDA (3.3V),4.7K~10K pull up resistor
needed
   
25 GND P Power Ground    
26 IOVCC P Power Supply for logic I/O 3.3V    
27 VCI P Power Supply for analog circuit 3.3V    
28 GND P Power Ground    
29 LEDA P LED anode    
30 LEDK P LED Cathode    
31 LEDK P LED Cathode    

 

 

 

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Shenzhen Wanshujie Photoelectric Technology Co., Ltd.
Location Room 601, Building 2, No. 6, Xinshiqiao Street, Guihua Community, Guanlan Subdistrict, Longhua District, Shenzhen, Guangdong Province
Contact Person Allen Wang

Request A Quote

Please check your email address.
Your message must be at least 20 characters.