ALAND Numerical Control Multi Function Welding 3IN1 AC DC TIG MMA CUT Welding

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Brand: ALANDWELDING

Product Description

DESCRIPTION

Digital ControlIGBT inverter DC MMA,PulseACDC TIG and CUT. Lift and HF for TIG Hot arc start and arc force,Anti-stick for MMAHF or with HF pilot arc for Plasma cutting.32 bits MCU inside Foot pedal 2T/4T function Easy operation and normal selection for tig parameters. AC and DC mix pulse TIG Advanced square,soft square,triangular;sine, fourAC wave for selection.VRD for MMA (Option) PFC (option). 10memories for selection.

MODEL			Digi-Multi 250 ACDC
INPUT	Voltage	1 xAC220V~240V 50Hz
DC MMA	No-load Voltage	70V
		Base current Adjusting Range	10~200A
		Rated Output Current	200A
		Rated Duty Cycle	60%
AC TIG	No-load Voltage	70V
		Current Adjusting Range	5~250A
		SP % (AC balance)	10~70
		AC Square Wave Frequency	30~250Hz
		Rated Duty Cycle	60%
DC TIG	Current Adjusting Range	5~250A
DC TIG		Rated Duty Cycle	60%
Standard PULSE TIG	Peak Current	5~250A
		Base/peak Current ratio	5~95%
		Rated Duty Cycle	60%
		Pulse width	5%~95%
		pulse Freq.	0.1~500Hz@DC 0.1~250Hz@AC ADV.SQUARE 0.1~10Hz@AC SOFT.SQUARE&TRIANGULAR&SINE WAVE
Advanced PULSE TIG (MIX)	AC peak Current	5~200A
		DC(base)/AC peak Current Ratio	5~95%
		Rated Duty Cycle	60%
		Pulse width	5%~95%
		pulse (AC to DC-) Freq.	0.1~10Hz
Current UP/Down-slope Time			0~10S
Initial current/welding current			5~150%
crater-fill current/welding current			5~95%
Pre gas Flow Time			0~25s
Post gas Flow Time			0~25s
Arc starting Mode			HF/LIFT TIG
CUT	current Adjusting Range	15~60A
		Rated Duty Cycle	60%
		Post gas Flow Time	20~60s
Efficiency			≥80%
Mass			26kg
Protection Class of enclosure			IP21S
Outline Dimensions mm3			430x200x290