MODEL | | Digi-Multi 250 ACDC PULS |
INPUT | Voltage | 1 xAC220V~240V 50Hz |
DC
MMA | No-load Voltage | 70V |
| Base current Adjusting Range | 10~200A |
| Rated Output Current | 200A |
| Rated Duty Cycle | 60% |
AC
TIG | No-load Voltage | 70V |
| Current Adjusting Range | 5~250A |
| SP % (AC balance) | 10~70 |
| AC Square Wave Frequency | 30~250Hz |
| Rated Duty Cycle | 60% |
DC
TIG | Current Adjusting Range | 5~250A |
| Rated Duty Cycle | 60% |
Standard
PULSE
TIG | Peak Current | 5~250A |
| Base/peak Current ratio | 5~95% |
| Rated Duty Cycle | 60% |
| Pulse width | 5%~95% |
| pulse Freq. | 0.1~500Hz@DC
0.1~250Hz@AC ADV.SQUARE
0.1~10Hz@AC SOFT.SQUARE&TRIANGULAR&SINE WAVE |
Advanced
PULSE
TIG
(MIX) | AC peak Current | 5~200A |
| DC(base)/AC peak Current Ratio | 5~95% |
| Rated Duty Cycle | 60% |
| Pulse width | 5%~95% |
| pulse (AC to DC-) Freq. | 0.1~10Hz |
Current UP/Down-slope Time | | 0~10S |
Initial current/welding current | | 5~150% |
crater-fill current/welding current | | 5~95% |
Pre gas Flow Time | | 0~25s |
Post gas Flow Time | | 0~25s |
Arc starting Mode | | HF/LIFT TIG |
CUT | current Adjusting Range | 15~60A |
| Rated Duty Cycle | 60% |
| Post gas Flow Time | 20~60s |
Efficiency | | ≥80% |
Mass | | 26kg |
Protection Class of enclosure | | IP21S |
Outline Dimensions mm3 | | 430x200x290 |
